Table of Contents
Advertisement
Quick Links
TIGER STICK 40
MEMO
16
TIGER
TIGER
STICK 40
STICK 40
Assembly Instructions
No.4509
Specification:
Wing Span: 58.5" (1485mm)
Length: 50.1" (1272mm)
2
Wing Area: 714sq.in. (46dm )
Weight: 5lbs. (2.2kg)
Radio: 4CH Req'd
Engine: 40-46 Req'd
Warranty
Thunder Tiger Corp. guarantees this model kit to be free from defects in both material and
workmanship at date of manufacture. This warranty does not cover any components
damaged by use or modification, and in no case shall Thunder Tiger's liability exceed the
original purchase price of the kit. Thunder Tiger also reserves the right to change or
modify this warranty without notice.
Since Thunder Tiger Corp. has no control over possible shipping damages or construction
by the modeler, no liability can be assumed nor accepted for damage resulting from the
use by the user or the final user-assembled product. By the act of using this user-
assembled product, the user accepts all resulting liability. If the buyer is not prepared to
accept this liability, he should return this kit in new and unused condition to the place of
purchase for a full refund.
JE2028 V.2
1
Advertisement
Table of Contents
Related Manuals for THUNDER TIGER TIGER STICK 40
Summary of Contents for THUNDER TIGER TIGER STICK 40
-
Page 1: Assembly Instructions
Engine: 40-46 Req’d Warranty Thunder Tiger Corp. guarantees this model kit to be free from defects in both material and workmanship at date of manufacture. This warranty does not cover any components damaged by use or modification, and in no case shall Thunder Tiger's liability exceed the original purchase price of the kit. -
Page 2: Table Of Contents
ITEMS NEEDED Introduction All of us at Thunder Tiger want to thank you for choosing the best looking, easiest building and best flying ARF sport flyer available the Tiger Stick 40.The kit features state-of-the-art engineering that provides quick and easy assemble of a strong, yet lightweight airplane that will give you an enjoyable and educational experience. - Page 3 TIGER STICK 40 PARTS DRAWINGS PARTS DRAWINGS AS9139 Fuselage Set AS9144 Tail Gear Set As9145 Rudd/Elev. Pushrod 3x12mm Wood Screw (2) Mounting Strip (1) Silicon Ring (2) Elev (1) Fuselage (1) Tail Gear (1) 3x3mm Tail Wheel (1) Collar (1)
-
Page 4: Wing
TIGER STICK 40 PREASSEMBLY WING PRE-ASSEMBLY NOTES 1. If you are not an experienced R/C pilot, plan to have a fully competent pilot check your completed model and help you with your first flights. Even though we have tried to provide you with a very thorough instruction manual,... -
Page 5: Fuselage
TIGER STICK 40 FUSELAGE ENGINE INSTALL THE ENGINE 17.Remove the engine and drill a 3/32''(2.3mm) hole at each of the four marks you just made. “Brake-in” the 20. Install the muffler as shown. Attach a 6'' piece of 11. Thread a metal clevis onto each of the 12''threaded 14.Attach the engine mount plate and both mounting... -
Page 6: T A I
TIGER STICK 40 TAIL RADIO 22. Remove the contact area of horizontal stab, apply 24. Secure the tail gear mounting strip with two 3x12mm 27.Locate the control horns and 2.3X12mm screws. 30. Remove the servo horn from the servo then epoxy at the glue area then secure the stab in place with wood screws. -
Page 7: Control Throws
TIGER STICK 40 CONTROL THROWS BALANCE CONTROL THROWS make adding weight a simple task. Once you have everything positioned as necessary, wrap your receiver and battery pack in 1 /4' ' or 1 /2' ' thi ck Make sure the direction of servo moves correctly. If not f o a m f o r p r o t e c t i o n . -
Page 8: Safety Precautions
TIGER STICK 40 PRE-FLIGHT CHECKS SAFETY PRECAUTIONS running. Make all engine adjustments from behind the 5. Check the level of charge in both the transmitter and it is very important that you do not apply too much up 3.Clean the plane with paper towels and a light-duty engine.
Need help?
Do you have a question about the TIGER STICK 40 and is the answer not in the manual?
Questions and answers