HiRO H50291 Quick Installation Manual

HiRO H50291 11n 300Mbps
802.11b/g/n WiFi WLAN
Signal Repeater Range
Extender
Quick Installation Guide
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
.
that may cause undesired operation
Follow each STEP carefully and only go to the next step once you have completed
the previous STEP.
Connection of HiRO H50291 11n 300Mbps 802.11b/g/n WiFi WLAN Signal
Repeater Range Extender
1. Connecting Wired Devices such as PC or SlingBox using the supplied
RJ45 Ethernet cable to the HiRO H50291 11n 300Mbps 802.11b/g/n WiFi
WLAN Signal Repeater Range Extender's LAN Port.
2. Extend Wireless Network Range to other Wireless Devices
STEP 1 – WPS Pairing
WPS Pairing between HiRO H50291 11n 300Mbps 802.11b/g/n WiFi WLAN
Signal Repeater Range Extender and Wireless xDSL/Cable Modem or
AP/Router
1. Connect the HiRO H50291 11n 300Mbps 802.11b/g/n WiFi WLAN Signal
Repeater Range Extender to your wall-mounted power outlet close to the
Wireless xDSL/Cable Modem or AP/Router.
2. Press WPS button on Wireless xDSL/Cable Modem or AP/Router or
AP/Router for more than 3 seconds or till the WPS light flashes.
3. Press WPS button on HiRO H50291 11n 300Mbps 802.11b/g/n WiFi WLAN
Signal Repeater Range Extender for 3 seconds and release WPS button
4. Now the WPS LED is blinking and the HiRO H50291 11n 300Mbps
802.11b/g/n WiFi WLAN Signal Repeater Range Extender is doing WPS
Pairing with Wireless xDSL/Cable Modem or AP/Router.
5. Make sure to press the button within 120 seconds (2 minutes) after
pressing the Wireless xDSL/Cable Modem or AP/Router's WPS button.
If the HiRO H50291 11n 300Mbps 802.11b/g/n WiFi WLAN
Signal Repeater Range Extender's WiFi signal strength
LED isn't ON, please repeat STEP 1 WPS Pairing or goes
to STEP 2 as show below
***For Verizon FiOS Users w/ MI424WR w/o WPS button or
other devices w/o WPS button, pls goes to STEP 2
STEP 2 – LAN configuration
LAN configuration between HiRO H50291 11n 300Mbps 802.11b/g/n WiFi
WLAN Signal Repeater Range Extender and Wireless xDSL/Cable Modem or
AP/Router
1. From the LAN computer connected launch your web browser, type the
following URL in the web address (or location) box, and press [Enter] on your
keyboard:
http://10.0.0.2
2. Please enter the Login User Name: admin and Login Password: 1234 and
then click on Login button.
3. Ticks on Auto checkbox.
4. Click on Site Survey button and wait for 5 seconds for site surveying.
5. Ticks on "Select" radio button of SSID of the front AP and configure related
parameters
6. Click on Apply & Save button.
7. Click on "OK".
STEP 3 – Wireless Configuration
Wireless configuration between HiRO H50291 11n 300Mbps 802.11b/g/n WiFi
WLAN Signal Repeater Range Extender and Wireless xDSL/Cable Modem or
AP/Router
1. Double click on the wireless icon on your computer and search for the
wireless network that you enter SSID name.
2. Click on the wireless network that you enter SSID name (the default settings
SSID = REPEATERXXXX which could be found on the bottom side of the
device) to connect.
3. If the wireless network isn't encrypted, click on " Connect Anyway " to
connect.
4. If the wireless network is encrypted, enter your own wireless password at least
8 characters for example 12345678 in the key field / Network key field /
Confirm Network key field (the default settings Security Mode =
WPA/WPA2 Mixed, Pre-Shared Key = XXXXXXXX which could be found
on the bottom side of the device). You can later change this network key
via the wireless configuration menu.
5. Click on "Connect" or "Apply".
Repeat STEP 2 to continue configuring between HiRO H50291 11n 300Mbps
802.11b/g/n WiFi WLAN Signal Repeater Range Extender and Wireless
xDSL/Cable Modem or AP/Router
System Requirements
1. Pentium 200MHZ processor or above
2. Windows 8.1 / 8 / 7 / Vista / XP 32-bit 64-bit
Package Content
1. 11n Repeater
2. Quick Installation Guide
3. Ethernet Cable (RJ-45)
LED Meaning
Your HiRO H50291 11n 300Mbps 802.11b/g/n WiFi WLAN Signal Repeater Range
Extender has indicator lights on the Top side. Please see below as LED Indicator
definition.
Ethernet Ethernet Active indicator
Power Power indicator
Wireless Wireless Active indicator
WPS WPS Active indicator
Wifi Signal
Wireless Signal Strength
indicator
Table1. LED function
Label Color On Flash Off
Ethernet Transmit / Ethernet
Ethernet Blue
Connected Receive Data Disconnected
Waiting for
Power Blue Ready Power Off
device ready
Transmit /
Wireless Blue WLAN Ready WLAN Off
Receive Data
Start WPS pairing
WPS Blue N/A WPS Idle
within 2 minutes
WiFi
No WAN IP address
Ethernet Transmit /
Blue from xDSL / Cable
Connected Receive Data
Modem
Signal
Connectors
Table 2 shows the function of each connector and button of the device.
Table 2. Function / Description of Connectors
Connector Description
Ethernet Connects the device via LAN Ethernet to a PC
WPS
Press this button for 3 full seconds and the WPS LED will
flash to start WPS.
WPS Make sure to press the button within 120 seconds (2
minutes) after pressing the Wireless xDSL/Cable Modem
or AP/Router's WPS button.
RESET
Reset button. RESET the HiRO H50291 11n 300Mbps
802.11b/g/n WiFi WLAN Signal Repeater Range Extender to
RESET
its default settings.
Press this button for at least 3 full seconds to RESET device
to its default settings.