INTRODUCTION ..............FADER adjustment..............Advice ..................LOUDNESS function .............. - Road safety ................Telephone provision ............... - Reception conditions ............RADIO (Tuner) ............... - Care and maintenance ............Presetting buttons ..............- Compact Disc ............... Storing the last station heard..........Technical data ................
Page 3
Fast track selection ..............SCAN function ................ PAUSE function ............... PAUSE function ............... TRACK SCAN function ............TRACK REPEAT function ............. TRACK REPEAT function ............. RANDOM function ..............RANDOM function ..............Stopping CD playing ............... TPM function ................SECRET CODING ..............MP3 CD PLAYER ..............
The sound system has been designed in ac- ADVICE WARNING cordance with the special features of the Too high a volume when dri- passenger compartment, with a person- Road safety ving can put the driver’s life at alised design that blends with the style of risk and that of other people.
In the event of a fault, con- outwards; Always hold Compact Discs by the outer tact a Fiat Dealership. ❒ Never use chemical products for clean- circumference. Never touch the surface. To clean the front panel only use a soft, ing (e.g.: spray cans, antistatic or thin-...
IMPORTANT Should copy-protected IMPORTANT The CD player can read TECHNICAL DATA CDs be used, then, few seconds may be most of the compression systems cur- ❒ Power: 4 x 36 W required for playing them. Moreover, due rently on sale (e.g.: LAME, BLADE, XING, to the proliferation of always new and dif- FRAUNHOFER) however, due to the Standard HI-FI system...
AUDIO SECTION ❒ Mute/Pause function ❒ Loudness function ❒ Audio Clip Detect function ❒ Soft Mute function ❒ 5-band graphic equalizer ❒ Separate bass/treeble adjustment ❒ Balance (LH/RH balance) and Fader (front/rear balance) F0Q0600m CD / MP3 SECTION RADIO SECTION ❒...
Page 8
Button GENERAL FUNCTIONS Mode Short push on button ON/OFF Long push on button Volume adjustment Knob rotation left/right Volume on/off (MUTE/PAUSE) MUTE Short push on button Frequency band selection Short cyclic push on button BAND (FM 1, FM 2, FM 3, FM AST, LW, MW, AMAST) Alternative frequency Short push on button Program type...
Page 9
Tasto CD FUNCTIONS Mode Play previous/next track Short push on button È Í CD track fast forward/backward Long push on button ˚ Eject CD Short push on button BAND Select radio frequency band Short push on button Select next/previous CD (CD Changer mode) Short push on button CD+/CD–...
❒ Manual storage of 42 stations: 24 in the GENERAL INFORMATION Compact Disc section FM band (6 in FM1, 6 in FM2, 6 in FMT ❒ Disc select (disc no.) The sound system features the following and 6 in FMAST), 6 in the MW band, 6 functions: ❒...
MP3 CD section Audio section On multimedia CDs in addi- ❒ Folder selection (previous/next); ❒ Mute/Pause function; tion to sound tracks also da- ta tracks are recorded. Play- ❒ Track selection (forward/backward); ❒ Soft Mute function; ing one of these CDs may ❒...
TURNING THE SELECTING RADIO/CD/ SOUND SOURCE MEMORY SOUND SYSTEM ON CD CHANGER FUNCTION The sound system is switched on pressing Pressing briefly and repeatedly button SRC If while listening to a CD another function the button/knob ON/OFF. The turning on it is possible to select the following func- is selected (e.g.: the radio), playing is of the sound system radio can be con-...
MUTE FUNCTION SOFT MUTE FUNCTION BALANCE ADJUSTMENT (turning off the volume When the Mute function is turned on/off Proceed as follows: completely) the volume will gradually increase or de- – briefly and repeatedly press button AU- crease (Soft Mute function). To switch the Mute function on, press until the display shows “BAL- briefly the button MUTE.
PRESET/XX EQ SET*/ CLASSIC/ FADER ADJUSTMENT LOUDNESS FUNCTION ROCK/JAZZ FUNCTION Proceed as follows: The Loudness function improves the (equalizer on/off) sound volume when listening at low lev- – briefly and repeatedly press button AU- el, increasing the basses and trebles. When To turn the equalizer on press for long until the display shows “FADE”...
When the sound system is turned on, the The AM band is divided into sections: STORING THE LAST last function selected before turning off MW, LW and AMAST. The AMAST band STATION HEARD is played (Radio, Compact Disc or CD is reserved to the stations stored auto- The radio automatically keeps in storage Changer).
MANUAL TUNING SCAN FUNCTION SCANNING PRESET STATIONS (station scanning) This allows manual station searching in the Keep button SCAN pressed for at least chosen band. To turn this function on use 2 seconds to start scanning the preset sta- Press button SCAN to start scanning the tions in the current frequency band;...
MANUAL STATION STORAGE AUTOSTORE FUNCTION LISTENING TO STORED (automatic station storage) STATIONS Use buttons from 1 to 6 to store the sta- tion being heard in the selected band. To switch on the AutoSTore function (au- Proceed as follows: tomatic station storage), keep button Keep pressed one of these buttons (1 to –...
AF FUNCTION When the signal of the RDS station tuned TA FUNCTION weakens, the following two cases may oc- (alternative frequency search) (traffic information) cur: To turn the AF function on/off, press Certain stations in the FM band (in stor- –...
PTY FUNCTION VARIED Variety LEISURE Free time and hobbies (selecting a type of programme) POP M Pop music JAZZ Jazz Several radio station offer the programme (hits) COUNTRY Country music type service (PTY) within the FM band ROCK M Rock music (FM1, FM2, FM3).
PTY setting MENU Second level Menu options are the fol- lowing: Press button AF for over 2 seconds to MENU button options 1 Time display of the current RDS station display the PTY code of the current sta- (if available) tion.
AVAILABLE SETTINGS 2 - CD Compression 4 - SENS DX/LO (tuning sensitivity adjustment) This option enables to optimize the sound First level Menu options level according to the music being played With this function it is possible to change by the CD. the sensitivity of automatic station tun- 1 - TUNING SEEK ing.
Page 23
5 - NEWS (new programmes on/off) 6 - SVC (automatic volume 7 - EON TA DX/LO (traffic adjustment with car speed) announcements tuning sensitivity) This function is similar to the TA function: with FM station tuned and NEWS function The SVC function makes it possible to au- This function enables to change the re- active if a news bulletin is broadcast, the tomatically adapt the volume level to the...
Page 24
– use button Í or È to move the cursor 9 - CD NAMING 10 - TPM (allocating a name to the CD) through the characters (CD naming/track selection) (only in CD Changer mode) – press the MENU button to confirm This function can be selected only if a This function shall be used to give a name the CD name and to go to the TPM (Track...
Page 25
Second level menu options 3 - MAX VOLUME (max. volume 5 - AUTO (function setting) setting at switching on) With this function it is possible to set ra- 1 - RDS (station time display) This function can be used to set the max- dio turning on/off depending on car igni- imum volume (from 10 to 33) that can be tion/switching off or independent.
INTRODUCTION LOADING/EJECTING A CD TRACK SELECTION (forward/backward) This section only describes CD player op- To insert the CD, set it gently in place to Press briefly button Í to play the next eration variants: as concerns sound sys- activate the powered loading system, track on the CD and button È...
FAST FORWARD/BACKWARD FAST TRACK SELECTION TRACK SCAN FUNCTION (forward/backward) (scanning CD tracks) Keep button Í pressed to move the track selected forward at high speed and keep Press briefly button/knob With this function it is possible to play the button È pressed to move it quickly back- to enter the fast track selection beginning of all the tracks contained in the ward.
TRACK REPEAT FUNCTION RANDOM FUNCTION TPM FUNCTION (track repeat) (random track playing) (track program memory) Press briefly button 5 : the display will To start the random playing of tracks on With the TPM function (Track Program show the message “CD REPEAT the Compact Disc, press briefly button 6 Memory) it is possible to store the se- TRACK”.
INTRODUCTION READING MP3 CD – if after 2 minutes the CD-ROM reading is not ended. The display will show, for This section only describes MP3 CD play- Inserting a CD-ROM into the proper slot about 5 seconds, the message “CHECK er operation variants : as concerns sound will start two stages: DISC”.
TRACK PLAYING MODE DISP FUNCTION During track selection (see paragraph track selection (forward/backward), the When playing a CD-ROM with MP3 files, This function enables to change display display will show the folder number and the sound system will display the track settings for the different CD info (e.g.
* - Prodigy FOLDER STRUCTURE Selecting by the MENU button the op- tion “ON” or “ONCE” of the name scroll * - Experience The sound system with MP3 player: function (see paragraph “NAME SCROLL | - Jericho.mp3 FUNCTION”), will obtain single scroll of –...
REPEAT FOLDER FUNCTION RANDOM FUNCTION FOLDER NUMBER AND NAME (repeat tracks) (random playing of a folder tracks) DISPLAYING Press briefly button 5 to change the To start random playing of the Compact Press briefly button 4 to display the DISP track repeat mode: press the button fur- Disc tracks, press briefly button 6 folder number and name.
TRACK SELECTION FAST TRACK SELECTION NAME SCROLL FUNCTION (forward/backward) (forward/backward) (track/folder name scroll) Press briefly button Í to play the next Press briefly the button/knob 3 Pressing briefly the MENU button it is track contained in the CD-ROM and but- enter the fast selection mode.
INTRODUCTION SELECTING THE CD CHANGER OPERATION This section only describes CD Changer To turn on the CD Changer, turn the To play the Compact Discs in the CD (where provided) operation variants: as sound system on and then press briefly Changer, select “CDC”...
SELECTING A CD FAST FORWARD/BACKWARD The scanning sequence is the following: Keep button Í pressed to move the track Press button 1 CD + to select the next – from the track being played up to the selected fast forward and keep button È CD and button 2 CD –...
PAUSE FUNCTION RANDOM FUNCTION STOPPING CD PLAYING (random track playing) Press button ˚ or button SRC to return To pause the CD player, press briefly the button MUTE. The display will show to the tuner mode. To start random playing of tracks on the “CDC MUTE”.
ENTERING THE SECRET CODE WAITING TIMES Vain attempts Waiting OF THE RADIO (on the display) time (about) In order to make code deactivation and operation impossible, if a wrong code is Entry of the secret code is required to al- 1 minute entered the next attempts to enter the low the sound system to work after the...
ENTERING THE SECRET CODE To confirm the required digit press 5 OF THE CD CHANGER If the code has been entered properly, the radio and the CD Changer start to work Should the control code between the regularly. sound system and the CD Changer be not recognised, to restore CD Changer regu- Otherwise try to enter the secret code a lar operation the four-digit secret code...
Page 41
Fiat Group Automobiles S.p.A. - Customer Services - Technical Services - Service Engineering Largo Senatore G. Agnelli, 5 - 10040 Volvera - Torino (Italia) Print n. 603.46.849 - 12/2008 - 4 edition...
Need help?
Do you have a question about the Bravo Soundsystem and is the answer not in the manual?
Questions and answers