Microwave - elddis Crusader Owner's Handbook Manual

HOW TO USE YOUR CARAVAN'S EQUIPMENT
Systems Test
To ensure a fully operational system follow these
steps:
1. Never operate the Alde boiler without
ensuring the heating system has antifreeze in
it. Check the header tank - 1cm above "Min"
mark when cold.
2. Ensure LPG and 230V connections are in
place - the 230V supply symbol should show.
3. Turn the boiler "ON" via the control panel.
4. Select a room temperature of 29 degrees on
the control panel.
5. Select 3kW - the circulation pump symbol
should now show.
6. Allow the boiler to operate until both flow
and return pipes are warm.
7. Select 3kW and turn it off, circulation pump
symbol should disappear.
8. Select gas and turn it on. Check the flue
outside to ensure boiler is operational,
circulation pump symbol should now be on.
9. Your Alde heating is set at 2kW (electric) at
the factory, however should you wish to
boost your heating system you can increase
this to 3kW. This should then be reduced to
2kW once the desired temperature has been
reached.

MICROWAVE

Notes:
1 - Your microwave is connected to your 230V
electricity supply via a non customer useable
plug.
2 - Switch on Omnivent to extract when using
microwave in cold ambient temperatures.
Controls:
1. Display - Cooking time, power level,
indicators and the current time are displayed
2. Auto Cook - Used to cook or reheat many
of your favourite foods.
3. Defrost - Used to defrost foods for time and
weight.
4. Power - Used to set power level
5. Clock - Used to set clock
6. One Touch Cook - Used to cook or reheat
specific quantities of food.
7. Time Set Pad - Used to set the cooking time
and the current time.
8. Stop/Clear - Used to stop the oven
operation or to delete the cooking data.
9. Start/+30 Sec - Used to start the oven and
also used to set a reheat time.
9-19