4. Install the center console; then install the seats making sure they are securely
latched.
Make sure the seats are secured before driving the vehicle. Severe per-
sonal injury may result if the seats are not properly secured.
OIL LEVEL STICK
2. Unscrew the oil level stick and wipe it with a clean cloth.
3. Install the oil level stick.
NOTE: The oil level stick should not be threaded in for checking
purposes.
4. Remove the oil level stick; the engine oil level should be above the "L" mark
but not higher than the "F" mark.
Do not overfill the engine with oil. Always make sure the oil level is
above the "L" mark but not higher than the "F" mark.
5. Install the center console; then install the seats making sure they are securely
latched.
��
! WARNING
There is an oil level stick for checking the
engine oil level. To check the oil level, use
the following procedure.
NOTE: The vehicle should be on
level ground when checking the
engine oil level.
1. Remove the driver and passenger
seats; then remove the center console.
ATV-0100
! CAUTION
45
Need help?
Do you have a question about the 2008 Prowler and is the answer not in the manual?
Questions and answers