Performing A Clean Boot; Waking The Mc75A - Motorola MC75A Integrator Manual

1 - 6 MC75A Enterprise Digital Assistant Integrator Guide

Performing a Clean Boot

CAUTION
A clean boot resets the MC75A to the factory default settings. All data in the
must download the Clean Boot Package file from the Support Central web site
(http://www.motorola.com/enterprisemobility/support) and install on the MC75A.
To perform a clean boot:
Download the Clean Boot Package from the Support Central web site
1.
(http://www.motorola.com/enterprisemobility/support). Follow the instructions included in the package for
installing the package onto the MC75A.
Simultaneously press the
2.
Immediately, as soon as the device starts to boot and before the splash screen is visible, press and hold the
3.
right scan button.
Insert the MC75A into a powered cradle.
4.
The MC75A updates and then re-boots.
5.
Calibrate the screen.
6.

Waking the MC75A

The wake-up conditions define what actions wake up the mobile computer after it has gone into suspend mode.
The mobile computer can go into suspend mode by either pressing the Power button or automatically by Control
Panel time-out settings. To set the wake up conditions tap Start > Setting > Power icon > Wakeup tab.
Power Wakeup Tab
Figure 1-4
A clean boot should only be performed by an authorized system administrator. You must connect the
MC75A to AC power during a clean boot.
Removing AC power from the MC75A during a clean boot may render the MC75A inoperable.
button and the
Power
Application
and keys.
1 9
folder is retained. You