Table of Contents
Advertisement
Bluetooth operation
Bluetooth pairing
1. Turn on the Bluetooth device (e.g. smart phone) and stay within 10m of your machine.
2. Press SOURCE button on the panel or press BT button on remote control to enter the
Bluetooth mode.
3. Enter the Bluetooth search list on your phone, and select the device named BTS-800.
4. Some devices may ask you to select OK/YES/PAIR to pair the phone with the unit.
For some devices, the device may ask you to input the pins to pair the unit, just input
"0000" (four Zero) as pass codes on your device to enable the connection.
5. When the devices are paired successfully, there will be a audible signal.
6. To disconnect your device and connect to a different device:
Turn off the Bluetooth function on your device and unpair the unit with your BT device.
Then follow the pairing Steps 2-5 to pair with a new device.
NFC connection
1. NFC function is a fast Bluetooth connection between our speaker and Bluetooth device
with NFC function. If your Bluetooth device has NFC function, check if the NFC software
on your device is available for use refer to your instructions.
2. Turn on our speakers to Bluetooth mode, and the NFC indicator lights up.
3. Place your NFC device (E.g. smart phone with NFC) on the NFC sensor for 3 seconds.
4. When they are paired successfully, you will hear an audible signal from the speaker.
5. To disconnect the device of NFC connection, place your NFC device on the NFC sensor
again for 3 seconds, and they will automatically disconnect.
NOTE:
1. The unit can only connect with one device at a time and the unit will memory the last
paired device the next time turning on to Bluetooth mode.
2. Not all Bluetooth device support NFC function. Please check your device's instructions.
3. Some NFC device make ask you to install the NFC APK to enable the function.
4. Always place the NFC device on the correct position of the NFC sensor.
5. If the device is out of Bluetooth range (10 meters), please put the device within the BT
search range and make connection again manually if it is suspended.
N F C sensor
8
Phone with NFC
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the BTS-800 and is the answer not in the manual?
Questions and answers
hi I can't connect via Bluetooth to my bts800 - my speakers were purchased 7 years ago. It tells me that it cannot pair
To troubleshoot Bluetooth pairing issues with your Sinotec BTS-800 speakers:
1. Ensure the Bluetooth device (e.g. smartphone) is turned on and within 10 meters of the speaker.
2. Press the SOURCE button on the speaker panel or the BT button on the remote to enter Bluetooth mode.
3. On your phone, search for Bluetooth devices and select "BTS-800."
4. If prompted, confirm pairing by selecting OK/YES/PAIR or enter the code "0000."
5. If pairing fails, turn off Bluetooth on your device and unpair the BTS-800.
6. Try pairing again by repeating steps 2 to 4.
Ensure no other devices are connected and that your device supports Bluetooth pairing.
This answer is automatically generated
How to change and set radio channels
To change and set radio channels on the Sinotec BTS-800:
1. Press the SOURCE button on the panel or the FM button on the remote control to enter FM mode.
2. Vary the antenna direction to get the best reception.
3. Use the 0-9 number buttons on the remote control to select a specific frequency or station.
4. Up to 60 stations can be preset when in radio mode with good reception.
This answer is automatically generated