Do you have a question about the FreeStyle Precision Neo and is the answer not in the manual?
Questions and answers
Manuel Matos
March 20, 2025
What does the E-1 code mean?
1 comments:
Mr. Anderson
March 20, 2025
The E-1 error code on the Abbott FreeStyle Precision Neo means that the temperature is too hot or too cold for the meter to work properly. To resolve this, move the meter and test strips to a location within the test strip operating temperature range, wait for them to adjust, and then repeat the test using a new test strip. If the error persists, contact Customer Service.
This answer is automatically generated
THOMAS WILLIAMS
April 14, 2025
NEED TO KNOW HOW TO LOAD LANCET INTO FREESTYLE PRECISION NEO LANCET HOLDER - QUICKLY PLEASE.
1 comments:
Mr. Anderson
April 15, 2025
To load the lancet into the Abbott FreeStyle Precision Neo lancet holder:
1. Twist off the lancet cap. 2. Replace the cap on the lancing device. 3. Set the depth. 4. Load the slider.
Follow the instructions for use for selecting a sampling point. Dispose of the used lancet according to local waste regulations.
This answer is automatically generated
Related Manuals for Abbott FreeStyle Precision Neo
Need help?
Do you have a question about the FreeStyle Precision Neo and is the answer not in the manual?
Questions and answers
What does the E-1 code mean?
The E-1 error code on the Abbott FreeStyle Precision Neo means that the temperature is too hot or too cold for the meter to work properly. To resolve this, move the meter and test strips to a location within the test strip operating temperature range, wait for them to adjust, and then repeat the test using a new test strip. If the error persists, contact Customer Service.
This answer is automatically generated
NEED TO KNOW HOW TO LOAD LANCET INTO FREESTYLE PRECISION NEO LANCET HOLDER - QUICKLY PLEASE.
To load the lancet into the Abbott FreeStyle Precision Neo lancet holder:
1. Twist off the lancet cap.
2. Replace the cap on the lancing device.
3. Set the depth.
4. Load the slider.
Follow the instructions for use for selecting a sampling point. Dispose of the used lancet according to local waste regulations.
This answer is automatically generated