Panasonic KX-TG9581 Operating Instructions Manual page 65

2
MbN: "Alert to" a MSELECTN a MADDN
3
MbN: "Phonebook" a MSELECTN
4
MbN: Select the desired phonebook entry.
a MSAVEN a MOFFN
n By entering a phone number:
1
For line 1: MMENUN#3381
For line 2: MMENUN#3382
2
MbN: "Alert to" a MSELECTN a MADDN
3
MbN: "Manual" a MSELECTN
4
Enter the desired name (16 characters
max.). a MOKN
5
Enter the desired number (24 digits max.).
a MOKN a MSELECTN a MOFFN
Base unit
n From the phonebook:
1
For line 1: MMENUN#3381
For line 2: MMENUN#3382
2
MbN: "Alert to" a MSELECTN a M
3
MbN: Select the desired phonebook entry.
a MSAVEN a MEXITN
n By entering a phone number:
1
For line 1: MMENUN#3381
For line 2: MMENUN#3382
2
MbN: "Alert to" a MSELECTN a MEDITN
3
Enter the desired name (16 characters
max.). a MOKN
4
Enter the desired number (24 digits max.).
a MOKN a MSELECTN a MEXITN
Turning on/off the new message alert setting
Handset / Base unit
1
For line 1: MMENUN#3381
For line 2: MMENUN#3382
2
MbN: "On/Off" a MSELECTN
3
MbN: Select the desired setting. a MSAVEN
4
Proceed with the operation for your unit.
Handset: MOFFN
Base unit: MEXITN
Editing the set phone number
Handset
1
For line 1: MMENUN#3381
For line 2: MMENUN#3382
For assistance, please visit http://www.panasonic.com/help
TG958x_0704_ver031.pdf 65
Answering System for Landline
2
MbN: "Alert to" a MSELECTN
3
MMENUN a MbN: "Edit" a MSELECTN
4
Edit the name if necessary (16 characters
max.). a MOKN
5
Edit the phone number if necessary (24 digits
max.). a MOKN a MSELECTN a MOFFN
Base unit
1
For line 1: MMENUN#3381
For line 2: MMENUN#3382
2
MbN: "Alert to" a MSELECTN a MEDITN
3
Edit the name if necessary (16 characters
max.). a MOKN
4
Edit the phone number if necessary (24 digits
max.). a MOKN a MSELECTN a MEXITN
Erasing the set phone number
Handset
1
For line 1: MMENUN#3381
For line 2: MMENUN#3382
N
2
MbN: "Alert to" a MSELECTN
3
MMENUN a MbN: "Erase" a MSELECTN
4
MbN: "Yes" a MSELECTN a MOFFN
R The new message alert setting is turned off.
Base unit
1
For line 1: MMENUN#3381
For line 2: MMENUN#3382
2
MbN: "Alert to" a MSELECTN a MERASEN
3
MbN: "Yes" a MSELECTN a MEXITN
R The new message alert setting is turned off.
Activating/inactivating the remote access code
to play messages
If you activate this feature, you must enter the
remote access code (page 66) to play the new
message from the new message alert call. This is
so that unauthorized parties cannot listen to your
messages. The default setting is "Inactivate".
– "Inactivate": You can listen to the message
by pressing 4 to play new messages (without
entering the remote access code).
– "Activate": You must enter your remote
access code (page 66) and then press 4 to
play new message.
65
2014/07/04 10:32:28