AT&T NVG589 Self-Installation Manual

AT&T U-verse
High Speed Internet
Wi-Fi Gateway
Before installation:
Do not attempt to install your
service until 2pm or later on your
service activation date. You can find
this date on your packing slip.
Get started
1. Check your service activation date.
Do not attempt to install your services until
2pm or later on the date provided to you
by AT&T. This date is also located on your
packing slip.
In the box:
1 Yellow Ethernet cable
1 Green data cable
Packing slip
®
911 Acknowledgment form
Terms of Service
AT&T U-verse Voice User Guide
AT&T High Speed Internet User Guide
911 stickers
Images are not to scale.
Voice and
self-
installation
guide
Approximate installation time: 30 minutes
2. Do you have a monitored home security system or
health alarm?
If either of these apply to you, you will need an AT&T technician
to install your service. Call 800.288.2020 to schedule an
appointment. Additional charges will apply for professional
installation services from an AT&T U-verse service technician.
Also needed:
Your 4-digit passcode.
You received a separate
letter confirming the 4-digit
passcode you designated
when placing your order.
Reminder:
· Your gateway does not contain a battery backup
· Battery backup is available for purchase from third party
manufacturers and retailers to keep you connected in the
event of a power failure. Visit att.com/batterybackup
for more information
(PnP NVG589 Add Internet + Voice)
02/15
ATT141210881-3