Advertisement
Table of Contents
- 1 Safety Precautions
- 2 Setup
- 3 Shredder Capacity
- 4 Operating the Shredder
- 5 Basket Full Alarm
- 6 Specifications
- 7 Paper Jams and Motor Overload Situations
- 8 In Case of a Minor Paper Jam the Overload LED will Light up
- 9 In Case of a Major Paper Jam the Overheat LED will Light up
- 10 Warranty, Registration & Technical Support
- Download this manual
Advertisement
Table of Contents
Need help?
Do you have a question about the 1620MX and is the answer not in the manual?
Questions and answers
How to fix squeaking in shedder when shredding paper
To fix squeaking in the Royal 1620MX shredder when shredding paper, try the following steps:
1. Lubricate the Blades – Use shredder oil or a lubricant sheet to reduce friction. Apply oil directly onto a sheet of paper, then run it through the shredder.
2. Check for Paper Jams – Remove any stuck paper or debris that may be causing extra strain on the motor.
3. Ensure Proper Use – Avoid exceeding the 16-sheet shredding limit to prevent excessive pressure on the blades.
4. Clean the Cutting Blades – Turn off and unplug the shredder, then remove any dust or paper buildup from the blades using a soft brush.
5. Inspect for Loose Parts – Ensure all components are securely in place, including the bin and shredder head.
If the squeaking persists, contact customer support, as the blades and motor are covered by a five-year warranty.
This answer is automatically generated