310-A and the new digitally amplified ART 525-A. The RCF Team always has the performer’s needs at the forefront of the design in order to create new lines of speakers with renewed features, improved sound clarity and definition and even lighter weight systems.
english REAR PANEL FEATURES AND CONTROLS STEREO JACK/FEMALE XLR INPUTS (BAL/UNBAL) The system accept jack or XLR input connectors. LIMITER LED The amplifier has a built in limiter circuit to prevent clipping of the amplifiers or overdriving the transducers. When the soft clipping circuit is active the LED blinks orange.
The switch shall be in proper position (unless moved from unauthorized people), but a fast check will avoid problems. In case is necessary to change the voltage please call your vendor or authorized RCF SERVICE CENTRE. This operation require the substitution of the fuse value and is reserved to an RCF SERVICE CENTRE.
Verificare inoltre l’idoneità del supporto (parete, soffitto, struttura ecc., al quale è ancorato il prodotto) e dei componenti utilizzati per il fissaggio (tasselli, viti, staffe non fornite da RCF ecc.) che devono garantire la sicurezza dell’impianto / installazione nel tempo, anche considerando, ad esempio, vibrazioni meccaniche normalmente generate da un trasduttore.
Page 7
EVOLUZIONE TECNOLOGICA, RIVOLUZIONE NEL SUONO RCF già nel 1996, con la prima introduzione della serie ART, si è posta come azienda leader nella tecnologia delle casse acustiche attive: un range di diffusori capaci di produrre un suono perfetto e potente con un cabinet leggero e capace di sopportare l’uso di ogni giorno.
Page 8
italiano CARATTERISTICHE E CONTROLLI DEL PANNELLO POSTERIORE INGRESSO JACK/XLR (SBILANCIATO/BILANCIATO) Il sistema accetta connettori di ingresso Jack o XLR. LED DI INSERIMANTO DEL LIMITER L’amplificatore è dotato di un circuito di limiter in modo da prevenire il clipping dell’amplificatore o di sovraccaricare gli altoparlanti.
Page 9
Se comunque vedete che questa spia resta accesa per lunghi momenti, è bene regolare più basso il livello dal mixer o dal controllo di volume del diffusore. SELEZIONE DELLA TENSIONE DI ALIMENTAZIONE (RISERVATO AI CENTRI SERVIZIO RCF) SELEZIONE 230 Volt, 50 HZ: VALORE FUSIBILE T10 AL 250V...
Page 10
ART 7 SERIES SUBWOOFERS TECHNICAL SPECIFICATIONS ACOUSTICAL Frequency response 45 - 120 Hz 40 - 120 Hz Max SPL 130 dB 131 dB Crossover Point 80 - 120 Hz 80 - 120 Hz TRANSDUCERS Low frequency 12” neo 3”voice coil 15”...
Need help?
Do you have a question about the ART-905-AS 7 Series and is the answer not in the manual?
Questions and answers