Table of Contents
Advertisement
ENGLISH
a short cycle. With cleaning in a dishwasher
the grease filter may become dull; this does
not effect its filtering capacity.
Grease filter maintenance:
1. Unplug the appliance or disconnect the
power supply.
2. Remove the grease filters: pull the spring
release handle, then remove the filter
downwards.
3. After cleaning the grease filter, remount
in reverse order ensuring the entire
extraction surface is covered.
Charcoal filter maintenance (if the hood is
installed in recirculation mode)
1. Unplug the appliance or disconnect the
power supply.
2. Remove the grease filter
3. If charcoal filters are already present
(two filters fitted, covering the protection
grids of the motor impeller) and must
be replaced, turn the central handle
anticlockwise to unlock them. Reverse
procedure to install new ones.
4. Refit the grease filter.
Charcoal filter is neither lavable nor
regenerable.
Replace the charcoal filter every 4
months.
Replacing the Halogen lamps
WARNING: - Only use 10W MAX - G4
halogen lamps.
1. Disconnect the hood from the electric
power supply.
2. Insert the blade of a small flat
screwdriver where indicated by the
three points, and with a gentlepressure
remove the light cover from its position.
3. Remove the faulty lamp and replace
with a new one.
4. Replace the cover (spring lock system).
IMPORTANT: make sure you don't touch the
lamp with your hands.
8
- Quick Links:
- Cleaning and Maintenance
- Technical Data
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the FÖLJANDE and is the answer not in the manual?
Questions and answers
mounting instruction
The mounting instructions for the IKEA FÖLJANDE wall-mounted extractor hood include:
1. Installation must be done by a qualified technician, following the manufacturer's instructions and local safety regulations.
2. The appliance must be disconnected from the power supply before installation.
3. Earthing is compulsory (except for class II hoods marked accordingly).
4. The hood is heavy and must be lifted and installed by two or more people.
5. The minimum distance between the hob and the bottom of the hood must be:
- 65 cm for gas or other fuel-burning hobs.
- 50 cm for electric cookers.
6. If the cooker's manual requires a greater distance, that distance must be used.
7. Ensure the room is well ventilated; room pressure must not exceed 4 Pa (4×10⁻⁵ bar).
8. Do not install or use the hood without properly fitted light bulbs.
This answer is automatically generated