5 ) Sync; (5. 1) Adjusting Horizontal Phase; (5. 2) Changing Rgb Sync; 6 ) Option - Toshiba IK-TF7 Instruction Manual

( 5 ) SYNC

When an external sync signal is input, the display menu changes from INT (internal sync) to EXT (external
sync) automatically.
Move up down
By pushing
MENU UP, DOWN
-- SYNC --
MODE EXT
H PHASE
0
RGB SYNC
G ON

(5. 1) Adjusting horizontal phase

1 Set the "→" to H PHASE by pushing [MENU UP], [MENU DOWN] buttons.
2 Adjust the horizontal phase by pushing [DATA UP], [DATA DOWN] buttons.

(5. 2) Changing RGB SYNC

1 Set the "→" to RGB SYNC by pushing [MENU UP], [MENU DOWN] buttons.
2 Select G ON, ALL ON or ALL OFF by pushing [DATA UP], [DATA DOWN] buttons.

( 6 ) OPTION

Move up down
By pushing
MENU UP, DOWN
-- OPTION --

BAUD RATE

9600
(6. 1) Changing RS232C communication baud rate
1 Set the "→" to BAUD RATE by pushing [MENU UP], [MENU DOWN] buttons.
2 Select either 9600 or 19200 by pushing [DATA UP], [DATA DOWN] buttons.
Set by pushing
DATA UP, DOWN
Set by pushing
DATA UP, DOWN
• Sync system display
• H PHASE -100 to 100
• RGB SYNC G ON, ALL ON, ALL OFF
• RS232C baud rate 9600, 19200
21