USING THE WASHING MACHINE
2
1
3
16
NO
YES
17
18
19
20
SM2831
The washing machine is fi tted with a three-compartment detergent drawer
compartment for pre-wash or soak soap powder (1)
compartment for normal wash soap powder (2)
softener compartment (3)
Use a low-suds detergent and softener (if required) recommended for automatic
washing machines. Follow the dosage instructions written on the packet.
N.B. Too much detergent can produce excessive suds and may
result in a poor wash.
Too little detergent will produce an unsatisfactory wash.
N.B. When adding detergent to the dispenser, remember to avoid
any spillage into the softener compartment, in that this would
create a soapy rinse and stain the fabrics white. Vice versa, if
softener is added to the detergent compartment, the quality of
the wash will be compromised.
N.B. When using a liquid detergent (recommended for pro-
grammes without pre-wash) proceed as follows: remove the baffl e
from its housing at the front of compartment 2 and insert it in the
guides near the centre of the same compartment.
close the detergent drawer before starting the wash.
Warning! Do not attempt to remove the detergent drawer while
the washing machine is in operation, as this will cause water to
fl ow out.
USE OF DETERGENTS
9
GB
Need help?
Do you have a question about the SAWD612 and is the answer not in the manual?
Questions and answers
Hello, my washing machine is somehow not functioning
Common issues and solutions for the Smeg SAWD612 washing machine not functioning include:
1. Display Off / Appliance Not Working:
- Ensure the mains power supply is working.
- Make sure the washing machine is perfectly level.
- Check that bulky items like sheets or tablecloths are not bundled together.
2. Error Codes:
- E:00: Perform checks listed in sections marked with *.
- E:01: Perform checks listed in sections marked with .
- E:02 / E:03: Technical malfunction – call customer service.
3. Filter Issue**:
- Unscrew and remove the filter by turning it anticlockwise.
- Clean it under running water.
- Reinstall by turning it clockwise, ensuring it seals properly.
These steps should be followed before contacting technical assistance.
This answer is automatically generated