ATA Voice Field Reference
Regional page
Regional page
Cisco Small Business ATA Administration Guide
Hunt Policy
You can use the Voice tab > Regional page to localize your system with the
appropriate regional settings. With some variations, depending on the model, this
page includes the following sections:
Call Progress Tones section section on page 135
Distinctive Ring Patterns section section on page 137
Distinctive Call Waiting Tone Patterns section section on page 138
Distinctive Ring/CWT Pattern Names section section on page 139
Ring and Call Waiting Tone Spec section section on page 140
Control Timer Values (sec) section section on page 141
Vertical Service Activation Codes section section on page 143
Vertical Service Announcement Codes section (SPA2102, SPA8000)
section on page 149
Outbound Call Codec Selection Codes section section on page 149
Miscellaneous section section on page 151
This parameter can be used to modify the hunting behavior
for trunk lines, based on the call state of the trunk lines that
are specified in the Voice tab > Trunk page, Contact List
field. The following options are available:
onhook only: An incoming call is directed to a specified trunk
line only if the call state is onhook.
any state: An incoming call is directed to any specified trunk
line without regard to the call state.
B
134