Do you have a question about the M70 series and is the answer not in the manual?
Questions and answers
George Gressell
March 12, 2025
M70 Blue tooth will not pair with I phone
1 comments:
Mr. Anderson
March 12, 2025
The Plantronics M70 series Bluetooth headset may not pair with an iPhone due to the following reasons:
1. Bluetooth Not Activated – Ensure Bluetooth is turned on in the iPhone's settings: *Settings > Bluetooth > On*. 2. Not in Pairing Mode – The headset must be in pairing mode, indicated by hearing "pairing" after selecting the language. 3. Device Not Found – The iPhone must scan for new devices under Bluetooth settings. 4. Incorrect Passcode – If prompted, enter "0000" as the passcode or accept the connection request. 5. Out of Range – The headset should be within 33 feet (10 meters) of the iPhone. 6. Already Paired to Another Device – Disconnect from other devices before pairing with the iPhone.
Following these steps should resolve the issue.
This answer is automatically generated
George Gressell
March 12, 2025
Will not pair with I phone
1 comments:
Mr. Anderson
March 12, 2025
The Plantronics M70 series may not pair with an iPhone due to the following reasons:
1. Bluetooth is not activated – Ensure Bluetooth is turned on in the iPhone's settings: *Settings > Bluetooth > On*. 2. Device not in pairing mode – The headset must be in pairing mode. Power it on for the first time, select a language, and wait for the "pairing" prompt. 3. iPhone not scanning for devices – Go to *Settings > Bluetooth* and ensure it is actively searching for new devices. 4. Incorrect passcode – If prompted, enter "0000" to complete pairing. 5. Previous pairing issues – If the headset was previously paired with another device, reset Bluetooth settings on the iPhone or remove any old connections. 6. Headset battery is low – Charge the headset before pairing. 7. Interference or distance issues – Ensure the headset and iPhone are close together and away from other wireless devices.
If pairing still fails, restart both the headset and iPhone and try again.
Need help?
Do you have a question about the M70 series and is the answer not in the manual?
Questions and answers
M70 Blue tooth will not pair with I phone
The Plantronics M70 series Bluetooth headset may not pair with an iPhone due to the following reasons:
1. Bluetooth Not Activated – Ensure Bluetooth is turned on in the iPhone's settings: *Settings > Bluetooth > On*.
2. Not in Pairing Mode – The headset must be in pairing mode, indicated by hearing "pairing" after selecting the language.
3. Device Not Found – The iPhone must scan for new devices under Bluetooth settings.
4. Incorrect Passcode – If prompted, enter "0000" as the passcode or accept the connection request.
5. Out of Range – The headset should be within 33 feet (10 meters) of the iPhone.
6. Already Paired to Another Device – Disconnect from other devices before pairing with the iPhone.
Following these steps should resolve the issue.
This answer is automatically generated
Will not pair with I phone
The Plantronics M70 series may not pair with an iPhone due to the following reasons:
1. Bluetooth is not activated – Ensure Bluetooth is turned on in the iPhone's settings: *Settings > Bluetooth > On*.
2. Device not in pairing mode – The headset must be in pairing mode. Power it on for the first time, select a language, and wait for the "pairing" prompt.
3. iPhone not scanning for devices – Go to *Settings > Bluetooth* and ensure it is actively searching for new devices.
4. Incorrect passcode – If prompted, enter "0000" to complete pairing.
5. Previous pairing issues – If the headset was previously paired with another device, reset Bluetooth settings on the iPhone or remove any old connections.
6. Headset battery is low – Charge the headset before pairing.
7. Interference or distance issues – Ensure the headset and iPhone are close together and away from other wireless devices.
If pairing still fails, restart both the headset and iPhone and try again.
This answer is automatically generated