Summary of Contents for Santa Medical LFM-110
- Page 1 ELECTRONIC PULSE MASSAGER Model: LFM-110 Operating Manual IMPORTANT: Please read all instructions carefully before using this product. Retain this manual for future reference. Gurin Products, LLC 2522 Chambers Road, Suite 100 Tustin, CA-92780...
- Page 2 IMPORTANT NOTICES TO USERS Do not use this device if you are using an implanted electronic medical device such as a pacemaker or other life-maintaining device. Do not use this unit if you are wearing electronic medial devices for monitoring health functions.
- Page 3 Introduction Santamedical Electronic Pulse massager is a user friendly product. It delivers electric impulses to tired and sore muscles. These impulses are generated by the device and delivered through electrodes to the skin in direct proximity to the target muscles. Your muscles respond to the impulses by contracting and relaxing rhythmically, which sends soothing massage sensations to relieve muscle tension and soreness.
- Page 4 Features Dual-channel: for simultaneous use on two users or the ability to use 4 pads 6 auto programs 3 massage modes Intensity range: 0-80 volts Pulse rate: 0-120 Hz adjustable Pulse width: 0-200 us Timer: 15 minutes Electrodes: 1.5” x 1.5”, 4/pkg SPECIFICATIONS Liquid crystal display 6 volts power provided by (4) AAA batteries...
- Page 5 PART IDENTIFICATION AND FUNCTIONS Power/Intensity buttons Turns device on or off Adjusts intensity level (strength of the pulse) Auto program buttons - 6 auto stimulation programs designed specifically for the following body parts: Waist, Shoulder, Joint, Sole, Hand and Foot and Repeat Button. Please refer to next page for program details.
- Page 6 SETUP Battery installation and replacement - Make sure both Power/Intensity switches are in the “OFF” position and Install (4) AAA batteries. The effectiveness of this device is related to power. When replacing batteries, choose high quality AAA batteries OPERATING INSTRUCTIONS •...
- Page 7 PRIMARY AREAS RECOMMENDED FOR TREATMENT Please be sure area to be treated is free of perspiration, dirt and abrasions. Attach to desired area as shown in diagrams above.
- Page 8 TROUBLESHOOTING If your device is not operating properly, please check below for common problems and suggested solutions. Stimulation is weak or non-existent Be sure skin is clean and pads are firmly attached to skin. Be sure the pads are not touching each other. Check that pads are moist and not worn out.
Need help?
Do you have a question about the LFM-110 and is the answer not in the manual?
Questions and answers