1. Manuals
  2. Brands
  3. StreetStrider Manuals
  4. Lawn Mower
  5. Eclipse
  6. Owner's manual

StreetStrider Eclipse Owner's Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

For Kids
Eclipse / JET
Owner's Manual
7042 North West Street, Suite 110, Fresno, CA 93711
©Fall 2011
1.800.348.0998
|
www.StreetStrider.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Eclipse and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for StreetStrider Eclipse

  • Page 1 For Kids Eclipse / JET Owner’s Manual 7042 North West Street, Suite 110, Fresno, CA 93711 ©Fall 2011 1.800.348.0998 www.StreetStrider.com...

  • Page 2: Table Of Contents

    8. Return Policy RECORDS Please record your StreetStrider model name (Eclipse or JET), serial number (stamped on the head tube beneath the quick release fold joint) and other information below in this manual. Please retain your sales receipt as proof of purchase and keep with the information below.

  • Page 3: About This Manual

    Riding a StreetStrider can be a hazardous activity even under the best of circumstances. It is highly recommended that your first ride on your new StreetStrider be taken in a controlled environment, away from cars, obstacles and other cyclists, and wearing your helmet.

  • Page 4: Hardware

    Hardware – A. Parts Identification The parts of the StreetStrider Eclipse are listed and labeled in the following table and figures. The parts of the StreetStrider JET (not shown) are identical to the Eclipse. Table 2A-1. StreetStrider Parts List. Parts are numbered in subsequent figures.
  • Page 5 Figure 2A-1. StreetStrider Eclipse Parts. Refer to Table 2A-1 for part numbers and descriptions. StreetStrider Eclipse and JET Owner’s Manual 5...

  • Page 6: Hardware List

    Hardware – B. Hardware Listi The hardware parts of the StreetStrider Eclipse are listed and labeled in the following table and figures. The hardware parts of the StreetStrider JET (not shown) are identical to the Eclipse. Table 2B-1. StreetStrider Eclipse Hardware List. Hardware parts are lettered in the following figure.
  • Page 7 Figure 2B-1. StreetStrider Eclipse Hardware. Refer to Table 2B-1 for hardware parts letters and descriptions. StreetStrider Eclipse and JET Owner’s Manual 7...

  • Page 8: Unpacking And Assembly

    Unpacking and Assembly - A. Eclipse The Eclipse, the first StreetStrider with a chainless hub, is very simple to assemble - you just have to put the two sections together, then unfold it. To assemble the Eclipse, first view the StreetStrider Workshop: Eclipse Assembly video provided on the StreetStrider DVD, then follow the steps and photos in this chapter, which are taken from the assembly video.

  • Page 9: Eclipse

    Collapsing the Telescoping Strider Ski To collapse the telescoping strider ski, place the Eclipse on the ground (Fig. 3A-8a), then lean it slightly to left side to locate a button on the underside of the strider ski near the quick release lever (Fig. 3A-8b). Open the quick release lever, depress the button, then slide the telescoping tube into the strider ski (Fig.
  • Page 10 (Fig. 3A-11a), then rotate the steering rods (Fig. 3A-11b) to adjust the wheels so they are parallel. Check by re-measuring the distances, then tighten the jam nuts with the 14 mm wrenches. The front wheels should remain aligned. 10 StreetStrider Eclipse and JET Owner’s Manual...

  • Page 11: Jet

    StreetStrider Velcro wrapping strap, Owner’s Manual, Assembly Checklist, StreetStrider DVD, and StreetStrider Tool Kit, including 10 mm X 12 mm open end wrench, 10 mm X 14 mm open end wrench, and 4 mm hex wrench.
  • Page 12 The rear wheel requires pumping through the Schrader valve (Fig. 3B-4c). NOTE: The revolutionary StreetStrider Hartmann hub is chainless (Fig. 3B-4c), with 3.7 to 1 single gear ratio. The chainless hub requires no chain maintenance and has no chain or toothed chain wheel to catch fingers or pants’ legs.
  • Page 13 To fold the head tube, lift up the front quick release lever, rotate the stem forward, then move the T-pin to the left out of the hole (Fig. 3B-7a), and fold down the head tube. Use the StreetStrider Velcro wrapping strap to tightly secure the front frame and strider poles together (Fig.

  • Page 14: Simple Steps To Learn To Stride

    Your StreetStrider is equipped with a lean-to-steer system. To make a turn, simply lean a little bit in the direction of the turn and the StreetStrider will begin to turn. The more you lean, the more the StreetStrider turns. To assist with turning, you may want to lower the foot platform on the inside of the turn.
  • Page 15 Even if you yourself have excellent night vision, many other people with whom you are sharing the road do not. A StreetStrider, like any object, is more difficult for motorists and pedestrians to see at dusk, night, or any other time of poor visibility.

  • Page 16: Mechanical Safety Check

    Replace damaged tires before StreetStriding. To check if your wheels are true, spin each wheel - if a wheel wobbles side to side or hits the brake pads, take the StreetStrider to a qualified bicycle shop to have the wheel trued. CAUTION: Wheels must be true for the brakes to work effectively.
  • Page 17 Terms of Limited Warranty This limited warranty is not meant to suggest or imply that the StreetStrider cannot be broken or will last forever. It does mean that the StreetStrider is covered subject to the terms of the limited warranty. •...

  • Page 18: Return Policy

    2. We will send the RMA number to you via email. 3. To send the StreetStrider and/or product back to us, you must pack it in the original packing material and box. Care must be taken in packing to prevent damage during shipping.
  • Page 19 7042 North West Street, Suite 110, Fresno, CA 93711 1.800.348.0998 www.StreetStrider.com © FALL 2011...

This manual is also suitable for:

Jet

Table of Contents