Table of Contents
Advertisement
Copying Different Size
Documents (Mixed Size)
When you use the ADF, you can copy multiple
documents having the same width but different
lengths at the same time onto their respective
paper sizes.
Note
You can use this function only when the document is a
combination of letter and legal 13.5 or of letter and legal
14.
When Enabling [Mixed Size], [Paper Feed] is set to
[Auto], a paper tray corresponding to a document is fed
and [Paper Feed] cannot be selected.
[Mixed Size] is available only when [Zoom] is set to [Fit
to page(98%)] or [100%].
You cannot set [Edge Erase] and [Mixed Size] at the
same time.
Enable more than one paper tray by pressing the
<SETTING> key and then selecting [Paper Setup]>
[Select Tray]>[Copy] to use this function.
When you use the MP tray, load paper in the MP tray first
and then enter the [Mixed Size] menu.
Memo
You can use only standard paper for this function.
In this section Tray1 and MP tray are used, and Legal 14 is
loaded in Tray1 and Letter is loaded in MP tray as an
example.
Load Legal 14 in Tray1 and Letter in MP
1
tray.
Press the <SETTING> key.
2
Press the
to select [Paper Setup] and
3
then press
.
OK
Select [Legal 14] for [Paper Size] of
4
Tray1 and [Letter] for [Paper Size] of
MP tray.
Press
until the top screen appears.
5
Press the <COPY> key.
6
Place your documents with mixing Letter
7
and Legal 14 sizes in the ADF.
Press the
to enter the [Change
8
settings] menu.
Press the
to select [Mixed Size] and
9
then press
.
OK
Press the
to select [ON] and then
10
press
.
OK
Press the
until the copy standby
11
screen appears.
Check that the following settings are
12
displayed on the start screen.
[Mixed Size]:
ON
[Paper Feed]:
Auto
[Zoom]:
100%
[Scan size]:
Legal 14
Enter the number of copies.
13
Press
14
M
ONO
Note for Using Multiple
Functions
Functions That Cannot Be Used
Simultaneously
Some functions cannot be used in combination
with other functions. If you try to select
incompatible functions, a message indicating that
you cannot select the function appears.
For example, when you have specified [Margin],
you cannot specify [N-in-1] and [Repeat].
When selecting [Margin]
you cannot specify [N-in-1]/
[Repeat].
Of functions displayed in the message, disable
unnecessary functions and then try to set a
function you want to use again.
Memo
Some functions cannot be used with others.
Disabling a Function
To disable one of the functions, return the
function's setting to the default.
Press the <COPY> key.
1
Press the
2
settings] menu.
Press the
3
want to disable and then press
Press the
4
and then press
Press the
5
screen appears.
Memo
When the default setting has been changed from the
factory default, select the default setting after changing
should be selected.
Reference
For the default value of each function, refer to
Information" P.
81.
- 15 -
Useful Functions
.
to enter the [Change
to select the function you
OK
to select the default value
.
OK
until the copy standby
1
.
"View
Hide quick links:
Advertisement
Table of Contents
