Installing The Engine - Yamaha 2004 Rhino 660 YXR660FAS Service Manual

ENGINE REMOVAL

INSTALLING THE ENGINE

1. Install:
• engine mounting bolt (rear) 1
• rubber damper (rear) 2
• rubber damper nut (front) 3
• engine assembly 4
• engine mounting bolt (front lower)/nut 5
• engine mounting bolt (front upper) 6
• rubber damper nut (rear) 7
NOTE:
Do not fully tighten the bolts and nuts.
2. Tighten:
• engine mounting bolt (rear) 1
• rubber damper nut (front) 3
• engine mounting bolt (M10, front lower)/nut
5
• engine mounting bolt (M6, front upper) 6
• rubber damper nut (rear) 7
4 - 8
ENG
33 Nm (3.3 m · kg, 24 ft · lb)
52 Nm (5.2 m · kg, 37 ft · lb)
56 Nm (5.6 m · kg, 40 ft · lb)
10 Nm (1.0 m · kg, 7.2 ft · lb)
52 Nm (5.2 m · kg, 37 ft · lb)