Microsoft Systems Center Operations Manager; Removing And Replacing Hardware Components - HP StoreEasy 1000 Storage Administrator's Manual

Microsoft Systems Center Operations Manager

Microsoft Systems Center Operations Manager (SCOM) provides comprehensive monitoring,
performance management, and analysis tools to maintain Windows OS and application platforms.
This solution allows you to monitor Microsoft Windows environments and HP storage products
through a common OpsMgr console. To download HP management packs for Microsoft System
Center Operations Manager, including installation, configuration, and usage documentation, visit
the HP Management Packs for Microsoft Systems Center site at:
www.hp.com/go/storageworks/scom2007

Removing and replacing hardware components

For information on removing and replacing a hardware component, follow the component removal
and replacement instructions in the appropriate storage system user guide.
NOTE: After replacing the system board, you must ensure that the correct product name is installed
on the replacement part. The correct product name is important for applications such as System
Insight Manager and Insight Remote Support. To install the correct product name, browse to the
C:\hpnas\components\support\naming folder. Locate and run the Smart Component that
applies to your system. After running the Smart Component, you must shut down and then restart
your system for the changes to take effect. If you run the incorrect Smart Component, the product
name will be set incorrectly, but it will not affect your system in any other way.
100 Troubleshooting, servicing, and maintenance