Preparations; Preparation Of The Camera - Sony UPX-C200 Operating Instructions Manual

CD-ROM System Requirements
The followings are required to access the supplied CD-
ROM.
Computer:
® ®
• Intel Pentium processor or personal computer
equipped with a 100% compatible processor.
• External or built-in CD-ROM drive
Operating system:
® ®
• Microsoft Windows 95
® ®
• Microsoft Windows 98
® ®
• Microsoft Windows 98 Second Edition
® ®
• Microsoft Windows Millennium Edition
® ®
• Microsoft Windows NT 4.0
® ®
• Microsoft Windows 2000 Professional
® ®
• Microsoft Windows XP Home Edition
® ®
• Microsoft Windows XP Professional
Reading the CD-ROM Manual
To read the manual on the CD-ROM, proceed as follows.
1 Insert the CD-ROM disc in your CD-ROM drive.
2 Open the folder shown below, and select the manual
that you want to read.
· Basic Instructions
· Advanced Instructions
· Utility Instructions
Note
When you use the utility software, the followings are
required:
® ®
Microsoft Windows 98 Second Edition
® ®
Microsoft Windows Millennium Edition
® ®
Microsoft Windows 2000 Professional
® ®
Microsoft Windows XP Home Edition
® ®
Microsoft Windows XP Professional
For details, refer to the Utility Software User's Guide.
Trademarks
Intel and Pentium are registered trademarks of Intel
Corporation or its subsidiaries in the United States and
other countries.
Microsoft, Windows and Windows NT are registered
trademarks of Microsoft Corporation in the United
States and/or other countries.
Adobe and Acrobat are registered trademarks of Adobe
System Incorporated in the United States and/or other
countries.

Preparations

Preparation of the Camera

Inserting batteries
Four NH-AA batteries and a lithium button battery CR-
2025 are supplied. Insert them as described below.
If you operate the camera with the batteries, charge the
batteries before use.
For details on charging the batteries, see "Charging
batteries" on page 32.
1
Open the battery compartment lid on the bottom of
the camera by sliding the button to OPEN with the
center projection of the button pressed.
2
Pull out the button battery case.
11
Preparations