Connections - Sanyo MPX-CD16P Instruction Manual

CONNECTIONS

Before making any connection, make sure the power has been turned off on all the devices.
NOTES:
•
If a connection is made to the S-VIDEO terminal, the (S-VIDEO) signal will have the priority.
•
For detailed information, please refer to the manuals accompanying the other connected devices.
Make sure all the connections are correct, if not that may cause a fire and/or damages.
•
Model MPX-MD16P does not have S-VIDEO IN, OUT terminals.
•
With model MPX-MD16P, use black and white cameras only. If colour cameras are used, that may cause image
beat, etc.
Signal flow
: VIDEO IN
: VIDEO OUT
: CAMERA IN
Video input terminal
Video output terminal
Timelapse VCR (sold separately)
Alarm input terminal
COM terminal
Switch output terminal
To pin 24
220 Ω
SW 1: Camera 1
220 Ω
SW 2: Camera 2
300 Ω
SW 3: Camera 3
360 Ω
SW 4: Camera 4
470 Ω
SW 5: Camera 5
680 Ω
SW 6: Camera 6
820 Ω
SW 7: Camera 7
1.2 kΩ
SW 8: Camera 8
1.8 kΩ
SW 9: Camera 9
2.2 kΩ
SW10: Camera 10
3.3 kΩ
SW11: Camera 11
4.7 kΩ
SW12: Camera 12
7.5 kΩ
SW13: Camera 13
13 kΩ
SW14: Camera 14
27 kΩ
SW15: Camera 15
68 kΩ
SW16: Camera 16
To pin 21
English
Monitor (sold separately)
Video input
connector
S-video
output
terminal
S-video
input
terminal
To pin 25
220 Ω
SW17: MENU
220 Ω
SW18: VCR
300 Ω
SW19: LIVE
360 Ω
SW20: MULTI
470 Ω
SW21: PLUS 1
680 Ω
SW22: SEQUENCE
820 Ω
SW23: ZOOM
1.2 kΩ
SW24: STILL
1.8 kΩ
SW25: POWER
To pin 23
Remote controller circuit
Video input
connector
S-VIDEO
To pin 1
To pin 2
To pin 3
To pin 4
To pin 5
To pin 6
To pin 7
To pin 8
To pin 9
To pin 10
To pin 11
To pin 12
To pin 13
To pin 14
To pin 15
To pin 16
To pin 17
Alarm sensor (door bell, interphone, etc.)
5
Video cameras (sold separately)
To outlet