Connecting Network Cable; Power On - D-Link 2×1000BASE-T User Manual

Connecting Network Cable

The Gigabit Ethernet Switch supports two 10/100/1000Mbps Gigabit
Ethernet ports and eight 10/100Mbps Fast Ethernet ports. Port 1 to
port 8 supports 10Mbps Ethernet or 100Mbps Fast Ethernet. Port 9 and
port 10 are Gigabit Ethernet port, it supports 10Mbps, 100Mbps and
1000Mbps. And these ports run both half duplex and full duplex while
it's running in 10Mbps, 100Mbps or 1000Mbps.
These ports are supported Auto-MDI feature, these ports can auto
transform to MDI-II or MDI-X type, so you can just make an easy
connection that without worrying if you are using a standard or
crossover cable.

Power on

The 10-port 10/100/1000Mbps Gigabit Ethernet Switch can be used
with AC power sources 100 - 240 VAC, 50 - 60 Hz. The Switch's power
supply will adjust to the local power source automatically and may be
turned on without having any or all LAN segment cables connected.
10