Self Programming Mode; Key Function Programming Mode - Kenwood PKT-23 Easy Programming Instructions

■ Self Programming Mode

SELF PROGRAMMING
First, turn Off the radio,
then operate keys to enter each mode.
Table # Functions
0 None
1 Low Transmit Power
2 Monitor
3 RX/TX Frequency Scan
4 Scan
5 Squelch Off
6 Super Lock-C
7 Super Lock-P
8 Tone Alert
[PF1] Press [PF1] Hold [PF2] Hold
○ ○
○ ○
○ ○
○ ○
○ ○
○ ○
○
N/A
○
N/A
○ ○
○
○
○
○
○
○
○
○
○
Self Programming Timer is 20 seconds
Mode Entry
1. Hold PWR + PF2 + UP to enter the mode.
Indications
1. Yellow LED lights.
2. Announces "Setup"
Operations
1. Use the [Up]/ [Down] keys to select the key
assignment from the table.
2. Press [PF1] to confirm the function chosen
to be assigned to [PF1] Press
OR
2. Hold [PF1] for 2 sec to confirm the function
chosen to be assigned to [PF1] Hold.
OR
2. Hold [PF2] for 2 sec to confirm the function
chosen to be assigned to [PF2] Hold.
3. Hold the [PTT] for 3 sec. Radio will store
the current configuration and confirmation
tone sounds and radio is reset and back to
normal operation.
4. To exit without save, hold [PWR] key.
Power off tone sounds and radio is off
without key function changes.