Table of Contents
Advertisement
Cleaning
Cleaning the inside of the main body
●
Clean once a month.
●
To remove and prevent water scale deposits, let the appliance cool for at least
10 minutes after use and then wash using the following procedures.
1
1
After the operation in step 7 of page 11, fill the water supply tank
with water up to the full mark.
2
2
Install the water supply tank into the appliance,
and then close the cover.
3
3
Shake the appliance horizontally 3 to 4 times.
●
Shake the appliance gently without tilting it.
4
4
Remove the water supply tank from the appliance
by pushing it, and discard the water in the water
supply tank.
5
5
Reinstall the water supply tank and close the cover.
●
Confirm the click.
6
6
Remove the water from the appliance by pressing the drain
button.
●
Return the appliance to a flat position and repeat the steps above to
times to ensure that all water is completely drained from the appliance.
7
7
Repeat the steps 1 to 6 above 2 to 3 times.
8
8
Wipe off any water from the appliance.
Even after draining the water, some water remains in the appliance.
This does not cause sanitary problems since the water is boiled when used the
next time.
Cleaning the ion steamer
Do not wash or soak the appliance in water.
Wipe the appliance with a cloth moistened with soapy water. Never use alcohol,
thinner, benzine, or enamel remover. Doing so may result in malfunction or cause
cracks or discoloration.
Cleaning the filter
●
Clean once a year.
Vacuum dust from the filter with an electric vacuum cleaner.
Cleaning the cool mist outlet
(When the cool mist is not released smoothly)
1
12-13
Turn off the power, remove the cap from the attached cleaning needle, and then
clean the cool mist outlet with a needle. (Put the needle straight in and out of the
hole to times.)
●
Forcefully pushing the needle may deform it. After cleaning, put the cap on the
needle and carefully store it together with the operating instructions.
●
Do not use any items other than the attached cleaning needle (e.g., a sewing
needle). Doing so may result in a malfunction.
●
Lightly wipe the parts around the cool mist outlet with a cotton swab to prevent
damage.
Do not insert any foreign substances, such as a hairpin, into the outlet or the filter.
Specifications
Power supply
Power consumption
Power cord length
Weight
Steam discharge rate
Steam mist discharge time
Approx. 15 min. (When selecting Clear skin course)
Steam temperature
(at a distance of approx. 0 cm from nozzle cap)
Steam waiting time
Mist discharge rate
The unit is applied to the Chinese standard GB 40.1, GB 40.15, GB 44.1
and GB 15.1
What is platinum steam?
Advanced ion steam* containing platinum nano-sized components of approx. 1 to
5 nm, as well as nano-sized ion steam (about 00 nm).
It is a cell-level component where the volume is about 1/0000 of ordinary steam.
Platinum steam can reach the deepest parts of the corneum to provide puffy skin
fitness and elasticity. (Depending on the person, the effects may not be obvious.)
* This is the result of further atomizing ionized (atomized) ordinary steam.
What is micro mist?
Atomized mist with a diameter of approx. 50 micrometers, which is capable of
cooling your entire face.
The cool feeling may vary with the ambient temperature.
AC 0 V, 50 Hz
4 W
Approx. 1.5 m
Approx. 1. kg
Approx. ml/min.
Approx. 40 ˚C
Approx. 0 sec.
Approx. 1 ml/min.
1
2008/01/19
13:21:56
Advertisement
Table of Contents
