Table of Contents
Advertisement
Streaming
Program video can be encoded on the unit and streamed
live using an external server or saved to the unit's internal
storage. Saved data can be exported to USB storage
devices and other external drives as VOD (Video On
Demand) files, and then uploaded to video-sharing
websites via a computer and played back.
Note
The streaming function used by the unit allows third
parties to access streaming data during transmissions. In
addition, the recommended destination is a site where
anyone can view its contents. If you want to protect
confidential data during transmissions, we recommend
consulting a specialist.
Preparation
This unit includes an encoding function for streaming
data, but it does not include a server function. Therefore,
you must connect it to an external server. Consult the
streaming server administrator to acquire the information
required for connecting to the external server.
The URL destination for connection is required. The
stream key and other information will be provided for
login.
This section describes hot to connect to Ustream as an
example.
1
Connect to the Ustream website using a separate
computer, and create a broadcast.
2
Acquire the URL and stream key information.
• When importing the information to the unit,
download the XML file and copy it to a USB
storage device, for example, and connect the device
to a USB port on the unit.
• When entering the information manually, write
down the information.
Tip
As of July 2013, connection to the following servers has
been verified.
• Ustream
Configuring Network Settings
Configure the unit's network.
78
Streaming
1
Connect a network cable to the LAN 1 connector on
the right side of the unit, and connect to a network.
2
Tap
in the sub screen to display the [System
Setup] screen, and tap [Network].
The [Network] screen appears.
3
Select [IPv4] or [IPv6] according to your operating
environment, configure the necessary settings, and
then tap [Apply].
For details on setting items, see "[Network] Screen"
(page 95).
Configuring Streaming Settings
Settings related to streaming are configured in the
[Streaming] screen of the sub screen.
You can display the [Streaming] screen by tapping the
streaming status that appears at the top center of the main
screen.
Tip
If [HDCP Handling] (page 98) is set to [On] in the
[System] screen, tapping the [Streaming] tab in the sub
screen or the streaming status in the main screen will not
display the [Streaming] screen.
Configure each setting in the [Streaming] screen.
Advertisement
Table of Contents
