Yamaha YSP-3000 Service Manual page 14

YSP-3000/YSP-30D/HTY-7030
12.Removal of Driver Tweeter
a. Remove 7 screws (Z) and 4 screws ([). (Fig. 10)
b. Remove the flame top. (Fig. 10)
c. Remove 6 screws (\). (Fig. 10)
d. Remove 9 screws ( ] ) and then remove stopper wire.
(Fig. 11)
e. Remove 12 screws ( ^ ) and then remove cabinet ar-
ray. (Fig. 11)
f. Remove 2 screws/piece ( a ). (Fig. 12)
g. Remove driver tweeter. (Fig. 12)
* Make sure that all the removed driver tweeter parts
are reinstalled at specified positions. (Fig. 12)
[
\
14
Z [
\
]
^
a
Z
Flame top
[
\
Fig. 10
^
Rear view
^
Rear view
TW21 TW19 TW17 TW15 TW13
TW20 TW18 TW16 TW14 TW12
CB502
Pin No. / CB508 CB507
1 (Red : +), 2 (Black : -) TW1 TW4
3 (Green : +), 4 (Black : -) TW2 TW5
5 (Yellow : +), 6 (Black : -) TW3 TW6
Installation of Driver (Tweeter)
Caution: Make sure that all the removed driver (tweeter)
parts are reinstalled at specified positions.
(Fig. 12)
Cabinet array
] ^ ] ^ ] ^
^ ] ^
Stopper wire
Fig. 11
Driver tweeter
a
TW11 TW9 TW7 TW5 TW3 TW1
TW10 TW8 TW6 TW4 TW2
CB504 CB506 CB508
CB503 CB505 CB507
Fig. 12
CB506 CB505 CB504 CB503 CB502
TW7 TW10 TW13 TW16 TW19
TW8 TW11 TW14 TW17 TW20
TW9 TW12 TW15 TW18 TW21