Yamaha 2012 TMAX XP500A Service Manual page 257

TIP
Install the parts to the swingarm "4" tempo-
rarily, making sure that the portion "a" of the
pivot shaft does not protrude past the
swingarm surface "b".
3. Install:
• Dowel pins
• Swingarm
• Swingarm bolts
• Drive pulley assembly
• Drive pulley assembly bolt
Swingarm bolt
40 Nm (4.0 m·kgf, 29 ft·lbf)
Drive pulley assembly bolt
48 Nm (4.8 m·kgf, 35 ft·lbf)
4. Tighten:
• Pivot shaft
• Pivot shaft nut
Pivot shaft
7 Nm (0.7 m·kgf, 5.1 ft·lbf)
Pivot shaft nut
100 Nm (10 m·kgf, 72 ft·lbf)
▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼
a. With your fingers, screw in the pivot shaft
until it touches the collar, and then tighten
the pivot shaft to the specified torque.
b. Tighten the pivot shaft nut to the specified
torque.
▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲
4-100
SWINGARM