Wps - Push Button Setup - D-Link DCS-7000L User Manual

Section 2: Installation

WPS - Push Button Setup

If your router supports WPS, you can use the WPS button on the camera to easily create a secure wireless connection to your
network.
To create a WPS connection:
Step 1
Press and hold the WPS button for approximately 5-6 seconds. The
blue WPS status LED above the button will blink.
WPS Button
Step 2
Within 60 seconds press the WPS button on your router. On some
routers, you may need to log in to the web interface and click on an
on-screen button to activate the WPS feature.
The DCS-7000L will automatically create a wireless connection to
your router. While connecting, the status LED will flash. When the
connection process is complete, the status LED will turn solid.
D-Link DCS-7000L User Manual 20