Table of Contents
Advertisement
80
en | RPS Setup and Maintenance
4.
Figure 6.3 Select Features Window
5.
6.
7.
6.2
Repairing RPS
NOTICE!
To repair the current RPS installation, you must use the original installation files.
i
–
–
To reinstall all of the program features installed during the previous setup:
1.
2.
3.
4.
5.
6.3
Removing RPS
To remove RPS and all of its features:
1.
2.
3.
4.
5.
6.
4998141259 | 09 | 2008.10
Click Modify, and then click Next. The Select Features dialog opens.
Select the checkboxes for the features you want to install, or clear the checkboxes for
the features you want to remove.
Click Next. The selected features are either installed or uninstalled as selected.
When the Install Complete dialog opens, click Finish to end the RPS Setup Maintenance
process.
If RPS was installed from the CD-ROM, you must use the CD-ROM.
If RPS was installed from a folder containing the installation files, you must use the same
folder in the location it resided at when RPS was installed.
Select Start > Settings > Control Panel > Add/Remove Programs. The Add/Remove
Programs dialog opens. Refer to Figure 6.1.
Scroll down the list until you see RPS. Click RPS to select it.
Click Change/Remove. The RPS Setup Maintenance dialog opens. Refer to Figure 6.2.
Click Repair, and then click Next. A progress indicator dialog opens. When the repair is
complete, the Install Complete dialog opens.
Click Finish to end the RPS Setup Maintenance process.
Select Start > Settings > Control Panel > Add/Remove Programs. The Add/Remove
Programs dialog opens. Refer to Figure 6.1.
Scroll down the list until you see RPS. Click RPS to select it.
Click Change/Remove. The RPS Setup Maintenance dialog opens. Refer to Figure 6.2.
Click Remove, and then click Next.
When the Confirm Uninstall dialog opens, click Yes. A progress dialog opens.
When the removal process is complete, restart the PC.
Installation Guide
RPS
Bosch Security Systems, Inc.
Advertisement
Table of Contents
