Motorola MK3100 Product Reference Manual page 56

5 - 14 MK3100 MicroKiosk for Windows Embedded Compact 7 Product Reference Guide
Bootloader Errors (Continued)
Table 5-1
Error Text
Invalid Symbol HEX file -23
Unrecognized or
unsupported HEX
record
Invalid data in HEX file
Exceeded max size
Partition is not valid on
this device
Wrong destination
code
Non-contiguous record
found
Timed Out - No data
Invalid file format
Partition Table not Valid -34
Invalid data in file
File cannot be loaded
to this unit
File validation failed
Error
Number
A HEX file download was attempted but the HEX file is invalid. Ensure
the file is in proper HEX file format.
-24 The HEX file being downloaded contains an invalid or unrecognized
HEX record. Ensure the file is in proper HEX file format.
-25 The HEX file being downloaded contains invalid data. Ensure the file is
in proper HEX file format with valid HEX data.
-26 The download file is too large to fit into the space allocated for it. Either
make the file smaller or increase the space allocated for it by altering
the partition table.
-27 The downloaded file specifies a partition entry that does not exist on the
device. Only download files that are valid for this device, or change the
partition table so that the new file is valid on the device.
-28 A specific partition was chosen from the Bootloader main menu but the
file selected for download was for another partition. Ensure that the
partition selected from the Bootloader main menu matches the file
selected for download.
-30 A HEX file download was attempted but the HEX file is invalid. Ensure
the file is in proper HEX file format.
-31 Bootloader was waiting for data from the source device but timed out
before receiving any. Check the source device connectivity and retry.
-33 The file format is invalid. Only HEX files are supported by Bootloader.
The size of flash memory is different than that described in the partition
table. Retry the download with the correct partition table file.
-35 The .bin or .sig file being downloaded contains invalid data. Ensure the
file is in proper file format.
-38 The file contains valid data that indicates it cannot be loaded onto the
device.
-40 The file has either been signed incorrectly, or contains data that
indicates that it cannot be loaded onto the terminal.
Probable Cause