Installation Under The Floor - Pioneer PDP-V401 Technical Manual

Special installation (Installation under the floor)

3.4.8 Installation under the floor

• If protective glass or similar material is used, the following installation conditions must be observed:
Floor
Exhaust
B
A + 50 mm
Exhaust fan
or less
Exhaust port
60 mm
or less
B
| Looking in the direction of the arrow (see the next page)
If the display is used in the closed space, observe the following conditions in the above environment:
In the closed space, keep the temperature at 30 °C or less.
38
<Ver. 2.1>
Protective glass surface
C
C
A
Exhaust
Flow of air from the air conditioner
A ≥ 20 mm (clearance between the protective glass and PDP)
B ≥ 100 mm (clearance between the PDP and side wall)
C ≥ 50 mm (clearance between the PDP and side wall)
D ≥ 290 mm (clearance between the surface of the PDP and the mounting surface under
the floor)
E ≥ D – 65 mm
F ≥ 180 mm
G ≥ 600 mm
Intake
B
Tempered glass, etc. (permeable)
A + 50 mm
or less
Intake port
60 mm or
less
B
C
G
F
C
E
D