Table of Contents
Advertisement
Figure 1–17 PCI DMA Addressing Example
21164 System
8KB
Page
21164 Memory
Space (8GB)
Figure 1–18 shows the PCI window logic. The comparison logic associated with
ad<63:32> is only used for DAC
window base register for window 3. This logic is only applicable to window 3. The
remaining windows only recognize 32-bit PCI addresses (that is, SAC
For a hit to occur in a DAC address, ad<63:40> must be zero, ad<39:32> must
match the window DAC base register, and ad<31:20> must also have a compare hit.
This scheme allows a naturally aligned, 1MB–4GB PCI window to be placed any-
where in the first 1TB of a 64-bit PCI address. When an address match occurs with a
PCI target window, the 21174 translates the 32-bit PCI address to addr_h<33:0>.
1 Dual-address cycle (DAC) — only issued if <63:32> are nonzero for a 64-bit address.
2 Single-address cycle (SAC) — all 32-bit addresses. A PCI device must use SAC if
<63:32> equals 0.
Scatter-Gather
Map
PCI Memory
Space (4GB)
1
mode; and only if enabled by a bit in the
PCI to Physical Memory Address
PCI Device's DMA
Memory Space
PCI
PCI
Device 0
Device 1
System Address Space
PCI
Device 2
LJ-05402.AI4
2
cycles).
A–35
Advertisement
Table of Contents
