Operation; Rapid Ignition System; Control Knobs - Miele KM 3034 Operating And Installation Instructions

Operation

Rapid ignition system

Control knobs

Small, medium and large burners
Wok burner
20
The appliance is supplied with a rapid ignition system with
the following features:
– Rapid ignition without pressing and holding in the control
knob.
– Automatic re-ignition
The burner is re-ignited if the flame is extinguished due to
a draught, for example. If re-ignition is unsuccessful, the
gas supply will be cut off (see "Thermo-electric ignition").
The control knob is used to ignite the burner and to regulate
the strength of the flame.
ßThe gas supply is turned off
& Strongest flame
/ Weakest flame
ßThe gas supply is turned off
&/ Strongest flame:
inner and outer burners
burn on the highest setting.
&& Strong flame:
outer burner on lowest setting,
inner burner on highest setting.
& Weak flame:
outer burner is off,
inner burner on highest setting.
/ Weakest flame:
outer burner is off,
inner burner on lowest setting.