Pci Express Driver For Windows; Before Installation; Installation Of The Pci Express Driver; Confirmation Of Installation Of The Pci Express Driver - Panasonic AJ-PCD35P Operating Instructions Manual

PCI EXPRESS Driver for Windows

This driver is for the PCI EXPRESS interface for
the P2 card on this unit.
The latest driver information can be viewed at the
following website.
https://eww.pavc.panasonic.co.jp/pro-av/

1) Before installation

System requirements for the PCI EXPRESS
driver are as follows.
OS: Windows XP Professional SP2 or SP3
Windows Vista Business or higher (SP1)
RAM: 1 GB or more
CPU: Core 2 Duo 2 GHz or higher is
recommended
2) Installation of the PCI EXPRESS
driver
Install the PCI EXPRESS driver in accordance
with the following procedures.
1
In accordance with the descriptions in "4.
Installation of the P2 Software" (from
pages 4 to 7 of the installation manual),
install the software up to Procedure No. 9.
2
When the window shown in Figure 10 of
Procedure No. 9 (page 7 in the installation
manual) is displayed, select "AJ-PCD35
(P2 drive) PCIe driver" and then click OK.
3
The warning box may be displayed; in
such a case, click "Continue Anyway". The
warning box may be displayed two or
more times.
4
In accordance with the instructions on the
screen, complete the installation and
restart the personal computer.
14
<Notes>
If a panel not described in this manual is
displayed during installation, click "Cancel" or
"Complete" to close it.
When connecting a second additional unit,
install the PCI EXPRESS driver once more
following the same procedures.
3) Confirmation of installation of the
PCI EXPRESS driver
When checking that the PCI EXPRESS driver is
properly installed, be sure to connect the
appropriate device to the personal computer.
Devices not connected to the personal computer
cannot be checked using the following method:
For Windows Vista Business,
select: "Start" > "Control Panel" > "System".
Click on Device Manager.
For Windows XP Professional,
select: "Start" > "Control Panel" > "System".
The System Properties window appears. Select
the Hardware tab, then click on Device Manager.