Table of Contents
Advertisement
6. Set the appropriate
mesh point is monitored.
7. Set the
Additional Port
Identity Services Engine (ISE) Authentication, Authorization and Accounting (AAA) server, when deployed in the network,
to dynamically authenticate a client.
When a client requests access to the network, the CISCO ISE RADIUS server presents the client with a URL where the
device's compliance to the networks security such as validity of anti-virus or anti-spyware software is checked for the
validity of their definition files (this checking is called posture). If the client device complies, then it is allowed access to
the network.
8. Set the
Aging Time
9. Select
OK
to save the changes made to the profile's Advanced Miscellaneous configuration. Select
last saved configuration.
5.2.14 Environmental Sensor Configuration
System Profile Configuration
NOTE: This feature is available on the AP8132 model only.
An AP8132 sensor module is a USB environmental sensor extension to an AP8132 model access point. It provides a variety of
sensing mechanisms, allowing the monitoring and reporting of the AP8132's radio coverage area. The output of the sensor's
detection mechanisms are viewable using the Environmental Sensor screen.
To set an environmental sensor configuration for an AP8132 model access point:
1. Select the
Configuration
2. Select Devices.
3. Select
System Profile
4. Select
Environmental Sensor.
Root Path Monitor Interval
value for
RADIUS Dynamic Authorization
value for
Client
Bridge. Use the spinner control to set a value in days, hours, minutes and seconds.
tab from the Web UI.
from the options on left-hand side of the UI.
The Environmental Sensor screen displays.
value. This setting configures the frequency at which the path to the root
field. Set this value to 1700 to enable a CISCO
Device Configuration 5 - 171
Reset
to revert to the
Hide quick links:
Advertisement
Table of Contents
