16
en | Codes
8
Codes
8.1
Enable / Disable the installer codes
This function allows user code holder to enable or disable the installer code.
Installer can only perform actions when he is enabled by a user.
1.
2.
8.2
Change individual code
This function allows user to change their individual code.
How to change the code
1.
2.
NOTICE!
This function is automatically terminated if you do not press a button within 240 seconds or if
you press [#]. One long beep indicates that the code already exists or that you entered an
incorrect user number.
F.01U.249.500 | V4 | 2011.12
Enter your user code + [98] and press [#] to enable the function.
Two beeps sound.
Enter your user code + [98] and press [*] to disable the function.
Two beeps sound.
Enter your code and press [ 99] [#].
Two beeps sound and the STAY and AWAY indicators flash, and your user number is
shown on the keypad.
Enter the new code and press [#].
Two beeps sound and the STAY and AWAY indicators are extinguished.
User Guide
AMAX panel 2000 / AMAX panel 2000 EN
Bosch Sicherheitssysteme GmbH