Toshiba DP120F Service Manual page 84

1.2.11 Line Monitor
This function is used to set the speaker ON in order to monitor the dialing and connection
portion of every transmission.
This function is mainly used to confirm dialing and phone line status.
When two phone lines are simultaneously used for sending, the job initiated last will be moni-
tored.
Use the [ ↑ ] or [ ↓ ] keys to select the desired option (ALWAYS or OFF), then press the
(1)
[ENTER] key.
LINE MONITOR
1.ALWAYS
2.OFF
ALWAYS
Always to set the Line Monitor function.
OFF
Not to set the Line Monitor function.
(2) After the "OPERATION COMPLETED" message is displayed, press the [STOP] key to
return to the Standby Mode screen.
DP120F/DP125F Function Settings
[MENU], [4], [1], [08]
4-18 March 2000 © TOSHIBA TEC