Toshiba e-studio166 Service Handbook page 42

Classi-
Code
fication
305 Scanner Image location adjustment
of secondary scanning
direction
(scanner section)
306 Scanner Image location adjustment
of primary scanning direc-
tion
(scanner section)
310 Scanner Forced performing of peak
detection
311 Scanner LED (R) current effective
value setting
312 Scanner LED (B) current effective
value setting
313 Scanner LED (YG) current effective
value setting
340 Scanner Reproduction ratio adjust-
ment of secondary scan-
ning direction
(scanner section)
350 Scanner Shading posi-
tion adjust-
ment
351
354 ADF Adjustment of ADF paper
alignment
357 ADF Fine adjustment of ADF
transport speed
e-STUDIO163/166/203/206
ERROR CODE AND SELF-DIAGNOSTIC MODE
Adjustment mode (05)
Func-
Items
tion
ALL
ALL
ALL
ALL
ALL
ALL
ALL
Original ALL
glass
ADF ALL
ALL
ALL
2 - 22
09/01
Default
<Accept-
RAM
able
value>
120 SYS When the value
<51-206> increases by "1", the
image shifts by approx.
0.0640 mm toward the
trailing edge of the
paper.
During this adjustment,
the density LED blinks.
130 SYS When the value
<121- increases by "1", the
136> image shifts by approx.
0.169 mm toward the
front side of the paper.
During this adjustment,
the density LED blinks.
- - Activates the light inten-
sity adjustment control
During this adjustment,
the density LED blinks.
76 SYS Displays total of the ini-
<0-255> tial value and light inten-
sity correction value.
62 SYS Displays total of the ini-
<0-255> tial value and light inten-
sity correction value.
160 SYS Displays total of the ini-
<0-255> tial value and light inten-
sity correction value.
125 SYS When the value
<76-181> increases by "1", the
reproduction ratio in the
secondary scanning
direction (vertical to
paper feeding direction)
increases by approx.
0.0947%.
During this adjustment,
the density LED blinks.
128 SYS 0.064 mm/step
<118-
138>
128 SYS
During this adjustment,
<118-
the density LED blinks.
138>
10 SYS When the value
<0-20> increases by "1", the
aligning amount
increases by approx.
0.4 mm.
50 SYS When the value
<0-100> increases by "1", the
reproduction ratio of the
secondary scanning
direction when using the
ADF increases by
approx. 0.1%.
During this adjustment,
the density LED blinks.
© 2005 - 2009 TOSHIBA TEC CORPORATION All rights reserved
Proce-
Contents
dure
1
1
7
1
1
1
1
1
1
1
1