Table of Contents

Advertisement

Quick Links

Contents/
Getting Ready
Phone Call
Inputting
Characters
Address Book/
Pair Function
Mail/
Hello Messenger
Camera
EZweb
EZ Navi
EZ FeliCa
EZ FM
PC Site Viewer
Simple Mode/
Teens Mode
Other Functions
Troubleshooting/
Remote Auto Lock
Index

Advertisement

Table of Contents
loading

Summary of Contents for Panasonic W51P

  • Page 1 Contents/ Getting Ready Phone Call Inputting Characters Address Book/ Pair Function Mail/ Hello Messenger Camera EZweb EZ Navi EZ FeliCa EZ FM PC Site Viewer Simple Mode/ Teens Mode Other Functions Troubleshooting/ Remote Auto Lock Index...
  • Page 2 Thank you for purchasing the W51P. Before using it for the first time, be sure to read the W51P Basic Manual (this PDF manual) so as to know how to use it correctly. After you finish reading this manual, store it and the printed materials that come with the phone in a safe place for future reference.
  • Page 3: Cellphone Etiquette

    Cellphone Etiquette Mind your manners! A cellphone always emits weak radio waves while it is turned on. Enjoy operation of your cellphone without forgetting to be considerate of those around you. Some locations do not allow the use of cellphones. Using a cellphone while driving is dangerous and prohibited by Traffic Control Law.
  • Page 4: Cellphone Basics

    They are all built-in functions. Page Hello Messenger Safety Buzzer EZ FeliCa Enjoy meeting with the Use W51P as high-volume Use the cellphone for members using our emergency buzzer by holding shopping by using down 0 for about one original cartoon-like e-money, or use it as characters.
  • Page 5: Manner Mode And Easy Voice Memo

    Normally leave the phone turned on. The phone needs to be turned on to make and receive Power calls. Hold down F for at least 1.5 seconds to turn on W51P. After a while, W51P turns on with tone and the standby screen appears. Page You cannot talk on the phone if it is unable to receive a signal.
  • Page 6: Never Use Your Cellphone While Driving

    Never use your cellphone while driving! Holding a cellphone in your hand, talking on a cellphone, or looking at a cellphone display to send mail or to perform any other operation while driving is prohibited by Japanese law. (Revised Traffic Control Law, effective November 1, 2004) Reading mail or looking Holding a cellphone in at the display.
  • Page 7: Beware Of Spam And One-Ring Calls

    Beware of spam and one-ring calls! How to Combat Spam You can set up mail filters to block specific mail or mail identified as “ ” (unsolicited advertisement), which often includes spam. Your cellphone has the following filters to block spam. (unsolicited advertisement filter) (address filters) (blocks specific mail)
  • Page 8: Disaster Message Board Service

    Disaster Message Board Service Disaster Message Board The Disaster Message Board lets you use EZweb to register information about your well-being in case of a major disaster. The information you register can be accessed from anywhere in Japan over EZweb or the Internet. When a major disaster strikes, you can use your au cellphone to access the “...
  • Page 9 for Registration Disaster Message Board top screen Information registration for Reference screen Information screen Registration contents are retained for up to 72 hours. You can register up to 10 entries per phone number. Registering a new one while there are already 10, automatically overwrites the oldest.
  • Page 10: Table Of Contents

    Getting Ready Checking the Contents of the Package ........... 10 Names of Parts ................. 11 Opening W51P by Using a Single Key (One-push Open) ....12 Charging the Battery ............... 12 Turning Power On ................14 Initial Values ..................14 Security Code and Passwords ............
  • Page 11 Viewing Photos in Simple Mode ............ 100 Teens Mode Using Teens Mode ................. 102 Activating Teens Mode ..............103 Other Functions Safety Buzzer ................104 One-push Open ................105 Troubleshooting ..........................107 If you lose your W51P ..............108 Index ................................ 110...
  • Page 12: Checking The Contents Of The Package

    Getting Ready Before using the W51P, check the contents of the package comes with your W51P. Be prepared to the basic operations such as; how to charge the battery, how to turn the power on, etc. Checking the Contents of the Package...
  • Page 13: Names Of Parts

    Names of Parts Names of Parts Front Back Charge Infrared port indicator (LED) Soft Illumination Panel Earpiece Incoming indicator (LED) Sub display Main display Camera lens Closeup switch Navigation Strap eyelet Application Optical sensor Address book key Mail key EZ key Stereo speaker Answer/ Memo/Clear key...
  • Page 14: Opening W51P By Using A Single Key (One-Push Open)

    Be careful not to drop it by its rebound when opening your W51P by pressing the key. Be careful not to catch your fingers when opening your W51P. You need to close your W51P manually. If it does not close, once open it fully and close it. Charging the Battery The battery pack that comes with the phone is not fully charged when purchased.
  • Page 15: Desktop Holder

    Fold out the power plug of the common AC adaptor 01 (option), and plug it into a 100V AC power outlet. Insert the W51P into the desktop holder. This will make the W51P charge indicator light red, and the battery level icon to ➔ ➔...
  • Page 16: Turning Power On

    Turning Power On Hold down F for at least 1.5 seconds. The standby screen appears. Icon Very Out of Signal Strong Medium Weak Weak Range Strength • Communication is not possible while the signal strength icon is (Out of Range). •...
  • Page 17: Security Code And Passwords

    Security Code and Passwords The W51P lets you use the numbers and passwords described below. Do not forget your numbers and passwords. You will need them to perform various operations and to access subscription services. Security Code For remote operation of the Voice Mail and Call Transfer from a...
  • Page 18: Selecting English As The Display Language

    Selecting English as the Display Language While the standby screen is displayed, press c. Use a to select “ ” (settings), and press c (OK). Press 3 ( (ScreenSetup/DisplayLighting).
  • Page 19 5 (Set Language). 2 (English). This selects English as the display language. Even if English is selected as the display language, schedule and other dates are displayed in the format year/month/day. Folder names inside of the Data Folder are also displayed in year/month/day format.
  • Page 20: Basic Operations

    0 will display key help. Holding down for about one second toggles side key’s disabling feature on and off while W51P is folded. To cancel the side key’s disabling feature, follow the procedure above with W51P opened.
  • Page 21: Display Indicators

    Display Indicators The following explains the main icons that appear on the standby screen. 12 34 5 67 Signal strength Battery level A microSD memory card (commercial item) is inserted into the cellphone. During a call EZ apps (BREW ® )/Hello Messenger on Unread mail au Music Player/SD-Audio Player/EZ...
  • Page 22: Main Menu

    Hello Messenger Photo/movie/barcode Communicates with reader can be used characters/voice/photo EZ FeliCa data folder EZ FeliCa can be Displays data in W51P used/set EZ FM microSD FM radio can be Displays data in the listened microSD memory card PC site viewer...
  • Page 23: Using Menus

    Using Soft Keys Soft keys are the keys you use to execute the functions along with the bottom of the screen. The table below explains how to assign the soft keys to the on-screen functions. Note that the function of each soft key depends on the currently displayed screen.
  • Page 24: Initializing E-Mail And Ezweb

    Initializing E-mail and EZweb An EZweb subscription is required to use e-mail and EZweb. If you did not subscribe when you purchased your phone, contact your nearest au shop or the au Customer Service Center. You will be assigned an e-mail address automatically when you perform the EZweb initialization procedure.
  • Page 25: Checking Your Current Phone Number And E-Mail Address

    Checking My phone number and Your Current Phone mail address Number and E-mail Address While the standby screen is displayed, press c. Use a to select “settings,” and press c (OK). Press 0 (Profile). Your current phone number and e-mail address appear.
  • Page 26: Changing Your E-Mail Address

    Changing Your E-mail Address E-mail address @ezweb.ne.jp Part you can change Domain name While the standby screen is displayed, press L. Press 0 (E-Mail Setup). Press 7 (Other Setup). When the EZweb connection confirmation screen appears, press 1 (Yes). Press 1 ( ) (Change E-mail Address).
  • Page 27 Enter your Security Code, press c (OK), use j to select “ ” (Send), and press c (Select). Use j to select “ ” (Accept), and press c (Select). Use j to select the text box, and press c (Edit). Enter the e-mail address you want, and press c (OK).
  • Page 28: Making A Call

    Phone Call Making a Call While the standby screen is displayed, use the number keys (0 to 9) of the keypad to enter the phone number you want to call. When calling a standard phone, you need to enter the area code. Press N.
  • Page 29: Making An International Call

    Making an International Call au International Call Service Available without any additional application Ex: To call 212-123- in the USA 005345 Press N. Area code International access code Country code (USA) Phone number • Calling charges for this service are added to monthly mobile phone calling charges and billed together.
  • Page 30: Answering A Call

    Press N to answer an incoming call. After you finish a call, press F to hang up. You can also answer the call just by opening W51P. Display for Incoming Calls If the caller’s name is in your address book, it appears on the display.
  • Page 31: Redialing(Outgoing Records/Incoming Records)

    Redialing (Outgoing Records/ Incoming Records) While the standby screen is displayed, press s. r : Displays outgoing records. l : Displays incoming records. Use j to select the record whose number you want to dial, and press The phone stores up to 50 records each for the outgoing records and incoming records.
  • Page 32: Changing The Ring Tone

    Changing the Ring Tone While the standby screen is displayed, press c. Use a to select “settings,” and press c (OK). Press 2 (Sound/Vib/ LED). Press 1 (Incoming Call).
  • Page 33 Press 2 (Melody). Press 1 (Fixed Sound). To hear the currently selected ring tone, press % (Check). Use j to select the ring tone you want, and press c (OK). The ring tone is set. The initial setting is “Incoming Tone1.” ®...
  • Page 34: Adjusting The Ring Tone Volume

    Adjusting the Ring Tone Volume To adjust the ring tone volume, perform steps 1 through 3 under “Changing the Ring Tone” (page 30), and continue with the following steps. Press 1 (Incoming Call). Press 1 (Volume). To hear the ring tone at the current volume setting, press % (Play).
  • Page 35: Adjusting The Earpiece Volume During A Call

    Adjusting the Earpiece Volume during a Call During a call, use j to adjust the volume. u : Increases volume. d : Decreases volume. You can adjust the earpiece volume (level 1-6). When you set the maximum volume (level 6), is displayed on the screen.
  • Page 36: Turning On Easy Voice Memo

    W51P can store up to 4 Easy Voice Memos, each of which can contain up to 20 seconds recording time. If a new Easy Voice Memo is recorded when there are already four in the memory, the oldest, unprotected, and has already been played back is deleted automatically to make room for the new one.
  • Page 37: Playing An Easy Voice Memo

    Playing an Easy Voice Memo When Easy Voice Memos are stored The messages “ Call” and “ EasyVoiceMemo” appear on the standby screen. Select “ Call,” and press c (OK). The incoming records list appears. Use j to select the record with the icon, and press c (Disp).
  • Page 38 Inputting Characters Input characters using keypad keys 0 through 9. The table below shows the characters each key cycles through when you press it. Number of Presses & ’ ˝ Toggles between upper case and lower case (Example: a Returns to the previous character. Undoes the last delete operation.
  • Page 39: Inputting An E-Mail Address

    Inputting an E-mail Address Inputting “mark@ezweb.ne.jp” In this example, we will input “mark@ezweb.ne.jp” for “ E-Mail Add1 .” To input “ E-Mail Add1 ,” perform steps 1 through 6 under “Registering an Address Book” (page 40), and perform the following steps. Input “mark.”...
  • Page 40: Inputting Pictographs And Useful Sentences

    Inputting Pictographs and Useful Sentences The following procedure shows how to input pictographs and useful sentences into the body text when creating a new e-mail message. Press % (Char), and (Pictograph). You can also select a pictograph by pressing #. Use a to select the pictograph you want, and press c (Select).
  • Page 41 Use j to select the useful sentence you want, and press c (OK). Here we will select “Happy birthday!.” You can also input “Happy birthday!” by pressing 17. The following shows the input screens for symbols (double-byte) and emoticons. Inputting Symbols (Double-byte) In step 1 of the procedure above, press % (Char), and 5 (&@) to display the “FullSym”...
  • Page 42: Registering An Address Book

    Address Book Registering an Address Book While the standby screen is displayed, hold down & for about one second. Select “ Name ,” and press c (Edit). Enter the name, and press c (OK). Reading is generated automatically when you enter a name. To input text “Inputting Characters”...
  • Page 43 Enter the phone number, and press c (OK). When entering the number of a standard phone, be sure to include the area code. Use j to select “ E-Mail Add1 ,” and press c (Edit). If you do not want to enter an e-mail address, jump to step 8.
  • Page 44: Editing An Address Book Record

    Editing an Address Address Birthday Book Record Group Example: To edit the phone number of “Tom Carter” While the standby screen is displayed, press &, use a to select the record you want to edit, and press & (Menu). Press 3 (Modify), and 1 (Overwrite).
  • Page 45: Adding Outgoing Or Incoming Record Data To The Address Book

    Adding Outgoing or Incoming Record Data to the Address Book While the standby screen is displayed, press s, use j to select the phone number you want to save, and press & (Menu). r : Displays outgoing records. l : Displays incoming records. Press 4 (Reg Add Book).
  • Page 46: Dialing From The Address Book

    Dialing from the Address Book While the standby screen is displayed, press &, and use a to select the record whose phone number you want to dial. Press c (Disp). The details screen of the record appears. Use j to select the phone number, and press...
  • Page 47: Registering A Pair Partner

    Pair Function You can save up to five phone numbers (like frequently used ones from the address book). You can make calls, send mails to or use Hello Messenger with these saved numbers (called Pair Partners) more easily. Registering a Pair Partner While the standby screen is displayed, press N.
  • Page 48: Making A Phone Call, Sending Mail, Invite A Pair Partner To A Hello Messenger Meeting

    Making a Phone Call, Sending Mail, Invite a Pair Partner to a Hello Messenger Meeting While the standby screen is displayed, press N. Use s to select the Pair partner. Use j to select “Call,” and press c (OK). Sending e-mail : After selecting “Send E-Mail” and pressing c (OK), selecting “Create New”...
  • Page 49: Using E-Mail

    Mail EZweb subscription required Your W51P supports two types of mail: e-mail and C-mail. Using E-mail To use e-mail, EZweb subscription is required. If you did not subscribe when purchasing your phone, contact your nearest au shop or the au Customer Service Center.
  • Page 50: Using C-Mail

    Using C-mail C-mail service allows you to exchange text messages containing up to 50 double-byte characters (100 single-byte characters) with other C-mail-enabled au cellphones. Page C-mail Center C-mail Center C-mail Center C-mail Center C-mail Center To the recipient’s phone number. Example: 090-0001-XXXX To your phone number.
  • Page 51: Creating And Sending E-Mail Messages

    Creating and Sending E-mail Messages While the standby screen is displayed, press L, and press 1 (Create New). Select , and press c (Edit). : Address to which the e-mail will be sent. You can send an e-mail up to five addressees at a time.
  • Page 52 Use j to select , and press c (Edit). : Subject of the e-mail message. Enter the subject, and press c (OK). Use j to select , and press c (Edit). : Body of the e-mail message. Enter the body text, and press c (OK).
  • Page 53: Reading Received E-Mail Messages

    The received e-mail message appears. If all of the message cannot be displayed, press d to scroll. Use L and R to scroll between messages. Press C to return to the e-mail message list. You can also enable to show the received e-mail message by opening W51P.
  • Page 54: Reading An E-Mail Message With Attached Photos Or Movies

    Reading an E-mail Message with Attached Photos or Movies Example: To see a photo attached to an e-mail. Use j to select the e-mail message, and press c (Disp). Use j to select a file name, and press c (Play). Depending on the size, the photo or movie file may not appear in step 2 of the procedure above.
  • Page 55: Replying To A Received E-Mail Message

    Replying to a Received E-mail Message To reply to an e-mail message, perform steps 1 through 3 under “Reading Received E-mail Messages” (page 51), and perform the following steps. Press % (Reply). Press c (Edit), and enter the body text. is prefixed with “Re:,”...
  • Page 56: Avoiding Spam

    Avoiding Spam It is recommended that you use our mail filter function to block spam. You can activate mail filter easily using “Supportive settings” by answering questions that appear on the display. Activating Mail Filter Example: To access “ ” (Supportive settings) 1 While the standby screen is displayed, press L.
  • Page 57: Creating And Sending C-Mail Messages

    Creating and Sending Hold down C-mail Messages . . . While the standby screen is displayed, hold down L for about one second, and press 1 (Create New). Select , and press c (Edit). Press 1 (Address Book), use a to select an addressee, and press c (Select).
  • Page 58: Reading Received C-Mail Messages

    (Disp). The received C-mail message appears. Use L and R to scroll between messages. Press C to return to the C-mail message list. You can also enable to show the received C-mail message by opening W51P.
  • Page 59: Hello Messenger

    Hello Messenger “Hello Messenger” is like a portable chat room which allows you to send text, sound and photo in real time to all the chatters (using au cellphone supporting this service). All chatters are represented by cartoon-style characters they selected.
  • Page 60: Displays The Hello Messenger Menu

    Displays the Hello Messenger Menu While the standby screen is displayed, press c. Use a to select “Hello Messenger,” and press c(OK). When you start Hello Messenger for the first time, press c (OK) and select your own cartoon-style character, then Hello Messenger press c( )(Setting).
  • Page 61: Invite The Members To The Meeting

    Invite the Members to the Meeting You can invite the members for the meeting. To start the meeting, perform steps 1 through 2 under “Displays the Hello Messenger Menu” (page 58), and continue with the following steps. Use j to select “ ”...
  • Page 62: When You Get An Invitation Message To Join

    You can register the member from “ ” (Hello Ranking) or “ ” (Group). You can activate Hello Messenger from address book, outgoing/incoming records, phone number input screen to start the meeting. When You Get an Invitation Message to Join When you get an invitation message to join, ring tones sounds or your cellphone vibrates.
  • Page 63: Camera Features

    Camera Features Your W51P comes with a built-in 2.1-megapixel, 2.07-million effective pixel camera to shoot photos and record movies. You can attach the photos and movies that you shot/recorded to e-mail messages. Using the Camera Shooting a Photo (page 63) Recording a Movie (page 64)
  • Page 64 “Movie Folder” in W51P Mode Quality M:128 96 High Quality L:176 144 Video “Movie Folder” in micro QVGA:320 240 Mode Memory Card When no microSD memory card is inserted, the files are saved to the Data Folder of W51P irrespective of its size.
  • Page 65: Camera

    Camera Shooting a Photo While the standby screen is displayed, press c, use a to select “camera,” and press c (OK). Press 1 (Photo). Point the lens at the subject, and press c (Shutter). The phone emits a shutter sound. Note that the phone emits the shutter sound even if Manner Mode is on.
  • Page 66: Recording A Movie

    Recording a Movie While the standby screen is displayed, press c. Use a to select “camera,” and press c (OK). Press 2 (Movie), point the lens at the subject, and press c (Rec). The phone emits a shutter sound to signal the start of recording.
  • Page 67 Meanings of the Photo Titles The initial photo mode setting when you purchase your W51P is “Normal Shot (Wallpaper 240 320)”. The photo you have shot is saved in Data Folder. Meanings of the Photo Titles in the “Photo Folder,” which is in the Data Folder.
  • Page 68: Viewing Photos And Movies

    Viewing Photos and Movies While the standby screen is displayed, press c, use a to select “data folder,” and press c (OK). Use j to select “Photo Folder,” or “Movie Folder,” and press c (Detail). Selecting “All Data” displays a list of all photos and movies in the “Photo Folder”...
  • Page 69: Attaching A Photo Or Movie To An E-Mail Message

    Attaching a Photo or Movie to an E-mail Message Perform the procedure from step 1 to 3 under “Shooting a Photo” (page 63) or “Recording a Movie” (page 64), and perform the following steps. Press % (E-Mail), and press 1 (Attach). Photos you shot are stored in the “Photo Folder”...
  • Page 70: Ezweb

    EZweb EZweb subscription required Using EZweb To use EZweb, EZweb subscription is required. If you did not subscribe when purchasing your phone, contact your nearest au shop or the au Customer Service Center. In addition to EZweb subscription, an initialization procedure is needed before you can use EZweb.
  • Page 71: Displaying The Ez Top Menu

    Displaying the EZ Top Menu While the standby screen is displayed, press R, use s to select “EZweb,” and press 1 (Top Menu). (Search by keywords) Provides information search function by keywords (Search by category) Searches for a site by category (Search by useful EZ services) Introduces useful, amusing and recommended unique services by EZweb...
  • Page 72: Bookmarking Sites You Frequently Access

    Bookmarking Sites You Bookmark Frequently Access Display favorite sites you want to bookmark, and press & (BrowserMenu). Press 1 (New bookmark). You may not be able to bookmark some sites. Press & (Reg). Use j to select a folder, and press c (OK). The message “Registered.”...
  • Page 73: Viewing A Bookmarked Site

    Viewing a Bookmarked Site While the standby screen is displayed, press R. Use s to select “EZweb,” and press 2 (Favorite Site). Use j to select a site or folder, and press c (OK). If you selected a folder, use j to select a site, and press c (OK).
  • Page 74: Downloading Chaku-Uta

    ® Downloading Chaku-Uta ® To download a Chaku-Uta , perform step 1 under “Displaying the EZ Top Menu” (page 69), and perform the following steps. Use j to select “ ” (Search by Category), and press c (OK). Use j to select “ ”...
  • Page 75: Downloading Chaku-Uta-Full

    Downloading ® Chaku-Uta-Full While the standby screen is displayed, press R, use s to select “au Music.” Press 2 (Jump to EZ Music!.) This operation connects the phone to “EZ Music!.” For the operations after connecting, follow the instructions displayed on the screen. In order to use fee-based contents, you need to enter your EZ password or premium EZ password.
  • Page 76: Checking Charges

    Checking Charges You can check call and transmission charges. While the standby screen is displayed, press c11. When the EZweb connection confirmation screen appears, press 1 (Yes). Use j to select the item you want to check, and press c (Select).
  • Page 77: Ez Channel-Plus/Ez Channel

    EZ Channel-Plus/EZ Channel EZweb subscription required EZ Channel-Plus/EZ Channel provides the latest programs you registered to download. Each updated content is automatically downloaded to your W51P. Displaying EZ Channel-Plus/EZ Channel Menu to select „ Press R. “ EZ Channel-plus. Standby screen...
  • Page 78: Ez Navi Features

    (Position Search) This is a service that you can check the location of an au cellphone supporting “Position Search” by operating W51P. There are two kinds of services: “ ” (Auto Position Search) (paid) and “ ” (Position Search Mail) (free).
  • Page 79 “EZnaviwalk” A menu of useful options you can use while you are out. Searchable source of a route guidance (voice navigation) (Navigation) to your destination, shops, and facilities You can view a map of your current location or any other (View Map)(free) location.
  • Page 80: Security Navi Features

    “ ” (Auto Position Search) Features • You must register each other’s information in both cellphones beforehand. When mother searches for child’s position, W51P automatically shows the child’s Park Park current position without operations from the child. Example: When the mother sent a mail Notice: The monthly fee is charged separately.
  • Page 81 Area Message Features This service lets you configure two au phones with specific areas and specific times. Whenever a child carrying one of the phones approaches (or is inside of) the specified area during the specified time period, an e-mail alert is sent to the other phone.
  • Page 82: Ez Felica

    Notes on Using EZ FeliCa Keep your W51P safe. In case your cellphone is lost, please contact the service company for details about EZ FeliCa-supported service. We recommend that you set FeliCa Lock or Remote Auto Lock in case of loss or theft.
  • Page 83: Communicating With Reader/Writer

    Communicating with Reader/Writer You can use EZ FeliCa simply by holding the FeliCa mark over reader/writer. Hold the FeliCa mark of W51P over reader/writer. FeliCa mark You can use EZ FeliCa without starting FeliCa-supported EZ apps. EZ FeliCa is available even when the power is turned off. However, while FeliCa Lock is active, or the battery level is very low, you may not be able to use EZ FeliCa.
  • Page 84: Setting Felica Lock

    FeliCa Lock to use EZ FeliCa. When FeliCa Lock is set, appears on the standby screen. In case you lost W51P, you can set the FeliCa Lock by setting Remote Auto Lock. Remote Auto Lock requires the initial setup beforehand.
  • Page 85: Using Felica-Supported Ez Apps

    Using FeliCa-supported EZ apps “QUICPay” ( ) is prepared as FeliCa-supported EZ apps in W51P at the time of purchase. Starting FeliCa-supported EZ apps While the standby screen is displayed, press c. Use a to select “EZ FeliCa,” and press c (OK).
  • Page 86: Ez Fm

    • EZweb subscription required The W51P allows you to listen to the FM radio. Before using an antenna Matsushita round-type earphone jack conversion adaptor 01 and MDR-E0931SP/BC by SONY have a built-in antenna to get a signal. When you listen to the EZ • FM, connect Matsushita round-type earphone jack conversion adaptor 01 and MDR-E0931SP/BC by SONY to get a signal.
  • Page 87: Listening To The Ez Fm

    Listening to the EZ • While the standby screen is displayed, press c, use a to select “EZ FM,” • and press c (OK). The precautions appear. Use j to check the precautions, and use j to select “ ” (Accept), and press c.
  • Page 88: Listening To The Ez·fm As Bgm/Stopping The Ez·fm

    Viewing and Operating the EZ•FM screen Icons appear if Main Operations: downloadable Operation information is provided Switches radio stations. Radio frequency Press 1 to 9 to switch to a radio station which is set to Displaying each key. changeover Tunes in on the station by 0.1 MHz. speaker/earphone Press s for more than one Radio station/Song title...
  • Page 89: Pc Site Viewer Features

    PC, by high speed packet transmission of 2.4 Mbps receiving at maximum. You can view WEB sites for PC with W51P Viewing a site with PC site viewer A WEB site for PC If you set the “...
  • Page 90: Pc Site Viewer

    PC Site Viewer Mastering Basic Operations While the standby screen is displayed, press c. Use a to select “PC site viewer,” press c (OK), and press & (OK). Warning message on packet transmission appears. Press 1 ( (Top Page). The initial setting is “Duogate” (http://duogate.jp/).
  • Page 91: Using Standby Assignment

    Using Standby Assignment It’s It’s updated. updated. You can set a portion of a WEB site as the standby screen. You can set it to be automatically-updated at specified intervals. When a specified time elapses on the standby screen, the WEB site selected by “ ”...
  • Page 92: Standby Screen

    Press c ( ) (Edit), enter the title, and press c (OK). Press & ( ) (Register), and press & ( (Setting). Use j to select the interval to update the standby screen. If you select the interval to automatically-update the page displayed as the standby screen from among “...
  • Page 93: Simple Mode

    Simple Mode Simple Mode lets you limit operations to the telephone function, address book, camera, e-mail, C-mail, EZweb, and other frequently used functions. Entering Simple Mode While the standby screen is displayed, press c, use a to select “settings,” and press c (OK).
  • Page 94: Exiting Simple Mode

    Exiting Simple Mode While the standby screen is displayed, press c. Use j to select “SETTINGS,” and press c (Select). Press 0 (SimpleModeOFF). Press 1 (Yes). This returns to Usual Mode.
  • Page 95: Using The Simple Mode Main Menu

    Using the Simple Mode Main Menu For composing For using the and reading address book, e-mail/C-mail outgoing/ messages, and for incoming changing records, and for e-mail addresses registering data in the address For checking book the latest news information For selecting the photo or For viewing and movie...
  • Page 96: Adding Data To The Address Book In Simple Mode

    Adding Data to the Address Book in Simple Mode While the standby screen is displayed, press &, press 2 (Register), and press c (Fix). Enter the name, and press c (OK). To input text “Inputting Characters” (page 36) Check the reading of the name you inputted, press c (OK), and press 3 (Input by Myself).
  • Page 97 Press 3 (Input by Myself). You can also select data in sending records or receiving records. To go without saving e-mail address, press 4 (Not Input) and perform step 7. Enter the e-mail address, and press c (OK). To input an e-mail address “Inputting an E-mail Address”...
  • Page 98: Using The Address Book In Simple Mode

    Using the Address Book in Simple Mode By using the address book, you can make phone calls and send e-mail messages. You can also start Hello messenger, edit/delete records in the address book, send it via Infrared communication. Example: To view a record in the address book While the standby screen is displayed, press &...
  • Page 99: Creating And Sending E-Mail Messages In Simple Mode

    Creating and Sending E-mail Messages in Simple Mode While the standby screen is displayed, press L, 1 (E-Mail), and 1 (Create Mail). Press 1 (Address Book), use a to select an addressee, and press c (Select) twice. You can select an addresses from sending/receiving records, or you can manually enter an address.
  • Page 100 Enter the body text, and press c (OK). To input text “Inputting Characters” (page 36) Press 3 (Not Attach). The confirmation screen appears. Press c (OK). (Data Folder): You can select a photo saved in the Data Folder and attach it to the e- mail message.
  • Page 101: Shooting A Photo In Simple Mode

    Shooting a Photo in Simple Mode While the standby screen is displayed, press c, use j to select “CAMERA,” and press c (Select). Press 1 (Photo), and press 1 (Photo1). Photo 1 Wallpaper 240 320 Photo 2 WideWallpaper 240 400 VGA 640 480 Photo 3 Point the lens at the...
  • Page 102: Viewing Photos In Simple Mode

    Viewing Photos in Simple Mode While the standby screen is displayed, press c, use j to select “DATA FOLDER,” and press c (Select). Press 1 (Data Folder). Use j to select “Photo Folder,” and press c (Select). Selecting “All Data” displays a list of all photos in the Photo Folder.
  • Page 103 Use a to select the photo you want to view, and press c (Menu). Press 1 (Play). The photo appears. 2 (Delete): Deletes data. 3 (Attach E-Mail): Displays a screen for composing an e-mail message with an attachment. To create an e-mail message Perform the procedure starting from step 2 under “Creating and Sending E-mail Messages in Simple Mode”...
  • Page 104: Teens Mode

    Teens Mode Teens Mode can be used to block spam, and to block inadvertent access to phone numbers and URLs included inside mail messages. Teens Mode can also be used to restrict call time and the number of sending mail. Using Teens Mode Teens Mode can be used to restrict mail reception and display contents.
  • Page 105: Activating Teens Mode

    Activating Teens Mode While the standby screen is displayed, press c, use a to select “settings,” and press c (OK). Press 5 (User Support), and 3 (OperationSupport). Press 3 (Mode Setup), and 3 (Teens Mode). Press 1 (Switch TeensMode), and enter the lock No., and press c (OK).
  • Page 106: Other Functions

    To stop Safety Buzzer To stop Safety Buzzer, input the lock No., and press c (OK). You cannot turn off W51P or perform any other operation while the Safety Buzzer is sounding. The Safety Buzzer will continue to sound until you input the lock No.
  • Page 107: One-Push Open

    : Answer incoming call when opening phone “ ” To set Open to Display New Press c 5 3 5, and press 1 (ON). Even if you open W51P, a new mail message is not displayed when “Auto Lock” or “Mail Rstr” is effective.
  • Page 108 In addition to the functions covered in this Basic Manual, your W51P also has the following features. Global Expert EZ apps (BREW ® W51P supports Global Expert based Enjoy downloaded games and other on au IC-Card. software. Global Expert is an international...
  • Page 109: Troubleshooting

    If the battery level is very low, “Now loading” is shown on the display, and after a while display disappear. For more detailed information, visit one of the following Panasonic websites. • On your W51P, go to http://www.pana-site.com/ez/ (P NO KANZUME).(Japanese only) • On your PC, go to http://panasonic.co.jp/pmc/contact/cb_0001.html.
  • Page 110: If You Lose Your W51P

    Configuring Remote Auto Lock Settings You can set Auto Lock and FeliCa Lock on by making calls several times from the registered phone number to your W51P within the specified period of time. While the standby screen is displayed, press c413, input the lock No., and press...
  • Page 111 After Remote Auto Lock turns active, your W51P is automatically turned off, and turned on again. Remote Auto Lock cannot be activated while your W51P is turned off or outside of the service area. When you purchase the W51P, its initial value in “Erase Data” setting is...
  • Page 112: Index

    Index E-mail address ....22, 23, 24 E-Mail Setup ........54 Address Book ........40 Initial settings ........22 Adding outgoing or incoming record Reading an e-mail message with data to the address book ..... 43 attached photos or movies ..52 Dialing from the address book ..
  • Page 113 Photo Photo Folder ........66 Mail Reshooting a photo ......65 C-mail ..........48 Sending a photo by e-mail ....67 E-mail ..........47 Shooting a photo ......63 Mail filter ......... 5, 54 Viewing photos ........ 66 Main menu ........20, 93 Playback Manner Mode Easy Voice Memo ......
  • Page 114 (toll free) From au cellphones: (toll free) Sales: KDDI Corporation Okinawa Cellular Telephone Company Manufactured by Panasonic Mobile Communications Co., Ltd Cellphone and PHS operators collect and recycle unused telephones, batteries and battery chargers at stores bearing the January 2007, 1...

Table of Contents