Software Upgrade; Figure 66 - Software Upgrade - Motorola PTP 300 Series User Manual

Point-to-point wireless bridge
Hide thumbs Also See for PTP 300 Series:
Table of Contents

Advertisement

The installation metric is simply the instantaneous receive power in dBm + 100.
The PDA installation tool is accessed via a hidden URL http://<ip-address>/pda.cgi. It should
be noted that this link is only available after the user has logged in as system administrator.
The large screen version of the graphical user interface is available as a submenu option of
the installation wizard.
7.8

Software Upgrade

The PTP 300 Series system has two software image banks; one is a fixed image which is
stored in protected non-volatile memory and cannot be modified by the user. The second
bank is used by the system administrator to upgrade the firmware when necessary. Figure 66
shows the main software upgrade web page.
The 'Fixed' or 'Recovery' image is used by the System Administrator to:
Reset Ethernet configuration to default settings
Erase Configuration
Upgrade software
For a full description of the Recovery image see Section 8 "Recovery Mode".
4Gon www.4Gon.co.uk info@4gon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299

Figure 66 - Software Upgrade

121
7 Web Page Reference

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ptp 500 series

Table of Contents