Panasonic KX-TA624 Installation Manual page 120

D
3-58 Features
The above features are activated simply by pressing the buttons on
the console which were pre-programmed as feature buttons.
A DSS Console has two types of buttons as shown below.
DSS Console KX-T7040
DSS (Direct Station Selection) buttons: Used to access
extensions, change the time (day/night/lunch) service, and set and
cancel the Remote Station Lock Control feature and so on. Each
button can be programmed to correspond to an extension. Pressing
a button allows the user to call the corresponding extension. Each
button also has an indicator (Busy Lamp Field), which shows the
current state of the corresponding extension as shown in the Table
below.
Light State of extension
Off
On
Flashing* FWD/DND is enabled.
Busy Lamp Field Table
To meet the user's various needs, DSS buttons can be changed to
the other feature buttons.
PF (Programmable Feature) buttons marked as F1 through
F16: These buttons have no default settings. The paired telephone
user can program the buttons for other feature buttons.
3
*: When program [112] is
assigned to "Enable",
Idle
the indicator will flash.
Busy
Features
DSS buttons
PF buttons