Sony IPELA PCS-G50 Technical Documentation Manual page 6

Integration with Sony Network Camera
©2008 Sony Corporation
Table 1
Authority
Function
Monitor live image
1
*
Call up preset position
Perform pan/tilt/zoom
operations
Receive audio
2
*
Control the setting menu
: Function available : Function not available
* : Up to 6 preset positions can be used.
1
Through the PCS-G50/G70, you can call any of the six registered preset positions (No.1 to No.6) in the preset position
table in the network camera's Preset Position Menu.
* : This function overwrites the network camera's settings. See the "Determined Communication Mode Based on
2
Authority" section for details.
Operating with Administrator Authority in PCS Integration
When you connect using the administrator authority, you can change the settings
of a network camera from the PCS-G50/G70. You can change the settings through
the Network Camera page in the PCS's General Setup menu. If "Auto" is selected
for "Bit Rate," "Frame Rate," "Mode" and "Image Size," the connection is made
using the settings of the connecting network camera.
If the connection is made using the administrator authority with the setting items
set to "Auto," the connection can be made by properly changing the network
camera settings even if a preconfigured item in the network camera setup is not
supported by the PCS-G50/G70. For details on the communication modes
supported by the PCS-G50/G70, refer to "Basic Specifications" at the end of this
document.
In addition, the far end camera control and preset functions can be used under the
administrator authority.
When the network camera settings are changed via the PCS-G50/G70, the
previously set network camera settings are automatically restored after
communication has ended.
• Connections made using the administrator authority automatically change the
Note
network camera settings and may affect a monitoring system using the network
camera, so you must consult with your system administrator beforehand.
• If a connection shuts down due to a failure such as a blackout, the settings
cannot be restored. It is therefore recommended to save the camera's setting
data in a file prior to connection. For details on how to save/restore the setting
data, see the User's Guide that came with the network camera.
VIDEO COMMUNICATION SYSTEM - TECHNICAL DOCUMENTATION
Administrator
Full Pan/
Tilt
User
Preset Light View
Position
February, 2008 / Ver 1.0 6