Toshiba Strata CTX Programming Manual page 524

Software and Firmware Updates
IP Telephone/BIPU Firmware Update Procedures
➤
From the WinAdmin PC perform the BIPU update
1. Select Maintenance > Components > Cabinet.
2. Force Disable the BIPU cabinet slot. This will also cause all IP telephones that are connected to the
disabled BIPU to be in the "MAKE BUSY" mode.
3. Select IP Telephone > BIPU Program Update.
4. Select the BIPU card slot and BIPU-M card type.
Only BIPU-M1A can be updated. Only BIPU-M1A card slots will be shown with WinAdmin 2.1F
Note
or higher. The BIPU type selection is not required.
5. Select Other (radio button).
6. Enter the ftp user login Name and Password.
7. Enter the IP address external ftp server.
8. From Data Directory box enter: CTXIPUPDATE
9. From File Name box enter: BIPUXXX
10. Click Start and observe the update status: Getting Updated file\Updating\Finished
Updating\Resetting\idle.
Notes
• It could take 1 to 5 minutes to update the BIPU
• If an error occurs, recheck file names, locations etc. and try again.
11. After the update is complete, select IP Telephone > BIPU Configuration. Check the BIUP version
numbers to verify they have been updated properly.
12. Select Maintenance > Components > Cabinet. Enable the BIPU cabinet slot. This will also cause all IP
telephones that are connected to the disabled BIPU to be in the operational mode.
IP Telephone Update
Important!
➤
Store the IP update files on the external ftp sever
1. Create an ftp directory and name it CTXIPUPDATE
2. Copy the DIPUXXXX update files to CTXIPUPDATE directory (XXX is the BIPU firmware version
level).
➤
From the WinAdmin PC perform the BIPU update
1. Select Maintenance > Components > Cabinet.
2. Force Disable the BIPU cabinet slot. This will also cause all IP telephones that are connected to the
disabled BIPU to be in the "MAKE BUSY" mode.
3. Select IP Telephone > IPT Program Update.
4. Select the IP PDN to be updated.
5. Select Other (radio button)
6. Enter the external server ftp user login Name and Password.
7. Enter the IP address external ftp server.
8. From Data Directory box enter: CTXIPUPDATE
E-8
Complete all "Prerequisites" on page E-7 before you do the following.
Strata CTX Programming - Part 4: Appendices 04/03