Bosch DCN Next Generation Installation And Operation Manual page 221

Conference System
Menu screens
Menu a
Menu a sets the display language of the interpreter desk when in the installation mode. The
language is set for all interpreter desks in the system.
Menu b
Menu b sets the interpreter desk to an interpreter booth. It is necessary to set each
interpreter desk in turn.
NOTICE!
If an interpreter booth is full, no entry is possible and no response is given.
Menu c
Menu c sets a desk number to the unit in the interpreter booth. It is necessary to set each
interpreter desk in turn.
NOTICE!
If a desk number is already in use, no entry is possible and no response is given.
Menu d
Menu d sets the number of necessary language channels in the system. The number is set for
all interpreter desks in the system.
The default number of channels in a system that does not have a control PC is 26.
Language
Contribution
Intercom
Delegate
Table 7.41 Channels
Menu e
Menu e sets the list of languages that are used to display on the interpreter desk display. The
language list is set for all interpreter desks in the system.
Bosch Security Systems B.V.
≤ 26 27 28
4 3 2
1 1 1
1 1 1
Installation and Operation manual
Configuration | en 221
29 30
1 1
1 0
0 0
DCN-NG_IOM_V4.1 | V1.3 | 2012.07
31
1
0
0