Yamaha Aventage RX-A3040 Owner's Manual page 100

• When the HDMI OUT 2 (ZONE OUT) jack is assigned to Zone2, you can enable/disable the audio output
from the HDMI OUT 2 jack by setting "Audio Output" (p.138) in the "Setup" menu to "On" or "Off" (default).
• You can also use speakers placed in Zone2 to output audio (p.32).
• Videos/audio interruptions may happen in another zone when any of the following operations is
performed.
– Tuning on/off a TV connected to the unit via HDMI or switching the TV input
– Enabling/disabling a zone output or selecting its input source
– Changing the sound mode or audio settings (such as "Extended Surround")
■
Operating the unit from another room
(remote connection)
You can operate the unit and external devices from Zone2, Zone3 or Zone4 using the
supplied remote control if you connect an infrared signal receiver/emitter to the unit's
REMOTE IN/OUT 1 or REMOTE IN/OUT 2 jacks.
• To operate external devices with the supplied remote control, you must register a remote control code for
each device before using (p.148).
The unit (rear) REMOTE IN/OUT 1–2 jacks
1
IN OUT
Infrared signal
transmitter
External device
(such as a CD player)
Main zone
PLAYBACK ➤ Playing back videos/audio in multiple rooms (multi-zone)
REMOTE
2
IN OUT
Infrared
signal
receiver
Remote control
Zone2, Zone3 or Zone4
100
En