Advanced Wireless Settings - D-Link DIR-615 User Manual

Section  - Configuration
Transmit Power: Set the transmit power of the antennas.
Beacon Period: Beacons are packets sent by an Access Point to
synchronize a wireless network. Specify a value.
100 is the default setting and is recommended.
RTS Threshold: This value should remain at its default setting
of . If inconsistent data flow is a problem,
only a minor modification should be made.
Fragmentation The fragmentation threshold, which is
Threshold: specified in bytes, determines whether packets
will be fragmented. Packets exceeding the
6 byte setting will be fragmented before
transmission. 6 is the default setting.
DTIM Interval: (Delivery Traffic Indication Message)  is
the default setting. A DTIM is a countdown
informing clients of the next window for listening
to broadcast and multicast messages.
802.11d: This enables 0.11d operation.
0.11d is a wireless specification developed to allow implementation of wireless networks in countries that cannot
use the 0.11 standard. This feature should only be enabled if you are in a country that requires it.
WMM Function: WMM is QoS for your wireless network. This will improve the quality of video and voice applications for your wireless clients.
Short GI: Check this box to reduce the guard interval time therefore increasing the data
capacity. However, it's less reliable and may create higher data loss.
D-Link DIR-615 User Manual

Advanced Wireless Settings