Specifications; General; Camera Head - Sony PMW-10MD Operating Instructions Manual

Specifications

General

Power requirements
100 to 240V AC, 50/60Hz
Power consumption
0.60A-0.36A (recording)
Peak inrush current
(1) Power ON, current probe method:
62 A (240V)
(2) Hot switching inrush current,
measured in accordance with
European standard EN55103-1:
15 A (230V)
Operating temperature
0ºC to 40ºC (32ºF to +104ºF)
Storage temperature
–20ºC to +60ºC (–4ºF to +140ºF)
Operating humidity
20 to 80% (no condensation allowed)
Storage humidity
20 to 90% (no condensation allowed)
Operating pressure
700 hPa to 1,060 hPa
Storage pressure
700 hPa to 1,060 hPa
Recording formats
Video
HQ mode: MPEG-2 MP@HL,
35 Mbps / VBR
1920 × 1080/59.94i, 50i
SP mode: MPEG-2 MP@H-14,
25 Mbps /CBR
1440 × 1080 /59.94i, 50i
Audio
HQ mode: LPCM (16 bits, 48 kHz, 2
channels)
Recording time
With one SBP-8
76
Specifications
SP mode: Approx. 35 min.
HQ mode: Approx. 25 min.
With one SBP-16
SP mode: Approx. 70 min.
HQ mode: Approx. 50 min.
With one SBP-32, SBS-32G1 or
SBS-32G1A
SP mode: Approx.140 min.
HQ mode: Approx. 100 min.
With one SBS-64G1A
SP mode: Approx. 280 min.
HQ mode: Approx. 200 min.
Mass Camera head: 90 g (3.2 oz)
Camera control unit: 2.8 kg (6 lb 2.8 oz)
Dimensions (w/h/d)
Camera head: 35×45×50 mm (1
13
1 / ×2 inches)
16
Camera control unit: 200×88×240mm
7 1
(7 / ×3 / ×9
8 2
Supplied accessories
See "Package Configuration" (page 13).

Camera head

Pickup device
1
/ -inch type, CMOS image sensor
2
Effective picture elements:
1920 (H) × 1080 (V)
Format
3-chip RGB
Optical system
F2.2 or more (prism system)
Lens mount
C-mount
Sensitivity
F10 (Typical) (With 1080/60i, 89.9%
reflection, 2000 lx)
Minimum illumination
0.14 lx (F2.2, +21 dB, 64-frame
accumulation)
Video S/N
54 dB (Y) (Typical)
7
/ ×
16
1
/ inches)
2